User's Manual

document, use and communication of its contents
not permitted without written authorization from ALCATEL
All rights reserved. Passing on and copying of this
Issue 02 -January, 10 2000 107/1363CC10875AAAA TQ BJA 02
Order
number
of
stages
Designation of stages linked
to the 9000LT
Comments
reference
of screen
or
paragraph
(§4)
VIII Setting traffic frequencies ODU characteristics:
. AMD Board associated & Band Width : fields filled
automatically: check that the parameters are those
anticipated.
. DownStream Central : Enter the frequency of the
downstream channel of the four upstream
channels.
. Upstream Central : Enter the central frequency of
the four upstream channels.
––> Confirm settings: after a few seconds, the four
frequencies of the upstream channels, Upstream #
1, Upstream # 2, Upstream # 3 et Upstream # 4,
are calculated and displayed.
NB: there are as many tabs as installed AMD boards.
Quit the screen to return to the BS supervision
screen (§4.5).
Note that the alarm indicator of the AMD card(s)
has switched from yellow to green, to indicate the
settings have been accepted.
4.7
IX Information about the BS . Name : enter the name of the base station (e.g.,
Base ST #1)
. Location : enter the location of the base station
(e.g., Orlando)
4.5
14. Quit the 9900LT software (cf. § 4.3.2)
15. Fill in the Installation Sheet (cf. Annex 1 of this Manual).