User guide

31 32
Beep duration 9.2.8
You can activate or cancel the beep emitted during a call with a specified
frequency (enter the frequency and confirm by "OK").
Auto redial9.2.9
You can activate or deactivate the automatic callback of your party for calls
that do not get through the first time
Call control9.3
Enter the password, you can set the call control.
Activation Activate call control by "By cost" or "By
duration". Deactivate it by "off".
Charge rate Set the charge rate of call control.
Change password Set the password for the first time and change it
according to your needs later.
Network9.4
Network selection
New search Search the potential networks.
Select network The choice of network connection is left up to
the user.
Search mode Network connection can be switched between
"Manual" and "Automatic".
Preferred network
List of networks to which you wish to be connected in order of priority.
Security9.5
SIM Security
Activate PIN The SIM card protection code is requested each
time the phone is powered on if this code is
activated.
Fixed dialed
number
Allows the phone to be "locked" so that it can
only dial certain numbers, or numbers with
certain prefixes. To activate this function, PIN2
code is mandatory.
Change PIN Change PIN code.
Change PIN2 A protection code for certain SIM card features
(Billing/Cost/FDN, etc.) will be requested if you
attempt to access it, if the code is activated.
Select to update it with a new one (between 4
and 8 digits).
Phone Security
Activate phone code Code is requested each time the phone is
powered on.
Change phone code Change phone password, its initial one is 1234.
Restore default settings9.6
Enter the password to restore the phone setting, its initial one 1234.