User Manual

67 68
6
Getting connected .....................................
To connect to the internet with this phone, you can use 4G LTE/4G/3G/2G networks or Wi-Fi,
whichever is most convenient.
6.1 Connecting to the Internet
6.1.1 4G LTE/4G/3G/2G
The first time you turn on your phone with your SIM card inserted, it will automatically configure your
network service: 4G LTE/4G/3G/2G.
To check the network connection you are using, touch Settings > More > Cellular networks >
Access Point Names or Network operators.
To create a new access point
A new 4G LTE/4G/3G/2G network connection can be added to your phone with the following steps:
rTouch Settings > More > Cellular networks > Access Point Names.
rThen touch
to enter the required APN information.
rWhen finished, touch the
key and touch Save.
To activate/deactivate Data roaming
When roaming, you can decide to connect/disconnect to a data service.
rTouch Settings > More > Cellular networks.
rSlide the switch beside Data roaming to the right to activate roaming mode.
rWhen Data roaming is disabled, you can still perform data exchange with a Wi-Fi connection (refer
to “6.1.2 Wi-Fi”).
To set preferred network mode
rTouch Settings > More > Cellular networks > Preferred network type.
6.1.2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your phone is within range of a wireless network.
Wi-Fi can be used on your phone even without a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
rTouch Settings > Wi-Fi.
rTouch the switch
beside Wi-Fi to turn on/off Wi-Fi.
rTurn on Wi-Fi, the detailed information of detected Wi-Fi networks is displayed in the Wi-Fi
networks section.
rTouch a Wi-Fi network to connect to it. If the network you selected is secured, you are required to
enter a password or other credentials (you may contact the network operator for details). When
finished, touch CONNECT.
To activate notification when a new
network is detected
When Wi-Fi is on and the network notification is activated, the Wi-Fi icon will appear on the status bar
whenever the phone detects an available wireless network within range. The following steps activate
the notification function when Wi-Fi is on:
rTouch Settings.
rTouch Wi-Fi, then touch the key and Advanced from the Wi-Fi screen.
rSlide the switch Network notification to activate/deactivate this function.
To add a Wi-Fi network
When Wi-Fi is on, you may add new Wi-Fi networks according to your preference.
rTouch Settings.
rTouch Wi-Fi, then touch the
key and Add network from the Wi-Fi screen.