A30 Tablet 8-inch User Guide

50
To make device visible
•Turn on Bluetooth.
•Touch your device to make it visible or invisible.
Topair/connectyourtabletwithaBluetoothdevice
To exchange data with another device, you need to turn Bluetooth on
and pair your tablet with the Bluetooth device with which you want
to exchange data.
•Drag down notification panel, and touch to switch to Quick
settings panel, then touch to access Settings.
•Turn on Bluetooth, your tablet will searching the available devices
automatically.
•Touch a Bluetooth device you want to be paired with in the list.
•A dialogue will popup, touch PAIR to confirm.
•If the pairing is successful, your tablet connects to the device.
Todisconnect/unpairfromaBluetoothdevice
•Touch the Settings icon beside the device you want to unpair.
•Touch FORGET to confirm.
7.3 Connecting to a computer
With the USB cable, you can transfer media files and other files
between microSD card/internal storage and computer.
Before using MTP or PTP you should firstly mark USB debugging.
•To access this function, touch Settings\About tablet, then touch
Build number 7 times. Now you may touch Settings\Developer
options\USB debugging.
Toconnect/disconnectyourtabletto/fromthecomputer:
•Use the USB cable that came with your tablet to connect the tablet
to a USB port on your computer. You will receive a notification that
the USB is connected as a media device.
•Drag down status bar to open the Notification panel and touch
“File transfers“, then select Charging, File transfers, or photo
transfers(PTP).