User Manual

F370/F370 Duo/Trio LA
A/W N.º: 10001165 Rev.0 (EN)
Printed in China
www.alcatel-home.com
1. KNOWING YOUR PHONE
1.
In idle mode: Press to access the main menu
In sub-menu mode: Press to confirm the selection
During a call: Press to access Intercom/Phonebook/Redial
List/Call List
2.
In main menu mode: Press to go back to idle screen
In sub-menu mode: Press to go back to previous level
In sub-menu mode: Press and hold to go back to idle screen
In editing/predialing mode: Press to clear a character/digit
In editing/predialing mode: Press and hold to delete all the
characters/digits
During a call: Press to mute/unmute the microphone
In idle mode: Press to intercom another handset
In ringing: Press to suppress handset ringer
3.
In idle mode: Press to access the call list
In menu mode: Press to scroll up the menu items
In Phonebook list/Redial list/Call List: Press to scroll up the
list
During a call: Press to increase the volume
In ringing: Press to increase the ringer volume
4.
In idle mode: Press to access the redial list
In menu mode: Press to scroll down the menu items
In Phonebook list/Redial list/Call List: Press to scroll down
thelist
During a call: Press to decrease the volume
In ringing: Press to decrease the ringer volume
5.
During a call: Press to end a call and go back to idle screen
In menu/editing mode: Press to go back to previous menu
In menu/editing mode: Press and hold to go back to idle
screen
In idle mode: Press and hold to power off the handset
In idle mode: Press and hold to power on/off the handset
6.
In idle/predialing mode: Press to insert a flash
During a call: Press to dial a flash
7.
In idle mode: Press to access the phonebook list
8.
During a call: Press to turn on/off the speakerphone
In Idle mode/Predialing mode/Redial list/Call List/Phonebook
entry: Press to make a call with speakerphone
During ringing: Press to answer a call with speakerphone
9.
ALPHANUMERIC KEYPAD,
,
* key in idle mode: Press and hold to enable or disable the
keypad lock
# key in idle mode: Press and hold to turn on/off the ringer
# key in call list mode: Press to review caller’s number if
applicable
0 key in predialing/number editing mode: Press and hold to
insert a pause
1, 2, 3 key in idle/off hook mode: Press and hold to dial the
stored direct memory number
10.
In idle/predialing mode: Press to make a call
In Redial list/Call List/Phonebook entry: Press to make a call
to the selected entry in the list
During ringing: Press to answer a call
1.2. Base Station Overview
1.
Press on the base station to page your handset. It will
ring for approximately 60 seconds.
Press and hold on the base station for about five seconds,
the base station is entered into registration mode and allows
handset registration.
1.3. Display Icons and Symbols
The LCD display gives you information on the current status of
the telephone.
2. PRECAUTIONS
The signal quality will depend on the location and environment
of the base and handset.
Position your F370 away from sources
of excessive heat
(radiators, direct sunlight, etc.) and protect it
from vibrations
and dust. Never allow your telephone to come
into contact
ter or other liquids, or with aerosols. To reduce the risk
of interference and optimize reception, take particular care not
to install the base in the immediate vicinity of windows, large
metal objects, reinforced concrete, televisions, music centres,
VCR or DVD players, halogen lamps or heating devices,
fluorescent lighting, burglar alarms, microwave ovens,
computers, etc.
This telephone requires an electrical power supply in order to
function.
To clean your F370, use an antistatic cloth lightly
moistened with water.
NB: Your F370 is a DECT™* standard appliance designed to
receive and transmit telephone calls. It is designed for
connection to the public telecommunications network.
3. INSTALLING YOUR PHONE
3.1. Installing and Charging the Batteries
1. Slide down to open the battery compartment cover.
2. Place the 2 supplied AAA rechargeable batteries as indicated.
Pay extra attention to direction of polarity.
3. Slide the battery compartment cover back.
4. Put the handset on the base and charge for 15 hours before
beep when it is properly placed on the base or charger.
Notes:
1. Use only the supplied NiMH rechargeable batteries.
2. If the handset will not be used for a long time, disconnect and
remove the batteries to prevent possible leakage.
3.2. Connecting the Base Station
1. Plug one end of the telephone line cord into the telephone
jack on base bottom.
2. Plug t
he small end of power adapter into a power jack on
base bottom.
3. Connect the power supply plug to the base jack.
4. Plug the large end of power adapter into a wall power outlet.
5. Plug the other end of the telephone line cord in to the
6. Always use the cables provided in the box.
If you have broadband service,
a micro-filter (not included) is required.
3.3. Connecting the Charger(s) (for Duo/Trio models)
Plug the power adapter into mains socket.
If you have a Broadband line
If you connect your telephone to a line with a broadband
connection, you will need to insert a micro-filter between the
telephone and the telephone line, otherwise you may get
interference between the telephone and the broadband, which
could cause problems.
In a home with broadband, every telephone must have a micro-
filter connected, not just the one at the telephone point that your
modem is connected to. If you need more broadband micro-
filters, contact your broadband supplier.
4. USING YOUR PHONE
4.1. Make a Call
4.1.1. Preparatory Dialing
Enter the phone number and press or
to dial the number.
to clear the entry.
4.1.2. Direct Dialing
Press
to take the line and enter
the phone number.
4.1.3. Dial from Direct Memory Keys
In idle or off hook mode, press and hold
/ / to dial the
direct memory number. You have to store number to the related
key first. See section 7.4 for reference.
4.1.4. Call from the Redial List
Press
to access
the redial list and press to select the desired
redial number.
Press to dial out to the selected
redial number.
4.2. Handset Speakerphone
During a call, you can press to alternate between handsfree
and normal handset use.
5. PRIVATE PHONEBOOK
Your phone can store up to 50 private phonebook entries
with names and numbers. Each phonebook entry can have a
maximum of 20 digits for the phone number and 12 characters
for the name. You can also select different ringtones for your
phonebook entries. Phonebook entries are stored alphabetically
by name.
5.1. Add a New Phonebook Entry
In idle:
1. Press to access the phonebook.
OR
Press and to select PHONEBOOK main menu item
and then press to access the phonebook.
2. Press to select ADD.
3. Press to enter the name.
4. Press to enter the number.
5. Press and to select the desired ringtone for your
phonebook entry.
6. Press to store the phonebook entry.
5.2. Call from the Phonebook
In idle:
1. Press to access the phonebook.
OR
Press
to select PHONEBOOK main menu item
and then press to access the phonebook.
2. Press or to dial out to the
selected phonebook entry.
6. CALLER DISPLAY (NETWORK DEPENDENT)
This feature is available if you have subscribed the Caller Line
Identification service with your telephone service provider. Your
phone can store up to 20 received calls with date/time information in
the Call List. The number will be shown on the LCD when the phone
is ringing. If the number matches with one of the entries in your
Private
Phonebook, the caller’s name stored in the private phonebook
will be displayed alternatively with the number. The handset will ring
with the melody associated with that phonebook entry.
If the caller number is disabled to send caller information,
“WITHHELD” will display.
If the caller number is not provided, “OUT OF AREA” will display.
In standby, if three unanswered calls are received, “3 NEW
CALLS” will be displayed.
6.1. View the Call List
All received calls are saved in Call List with the latest call putting
at the top of the list. When the call list is full, the oldest call will
be replaced by a new call. The unanswered call which has not
been read is marked with a at the centre of the bottom line of
the display.
1. Press to access the call list.
OR
Press
and to select CALL LIST.
2. Press to select the desired entry.
3. Press to view the caller’s number if applicable.
6.2. Call from the Call List
In idle:
1. Press to access the call list.
OR
Press to select CALL LIST.
2. Press or to dial out to the
selected phonebook entry.
7. PHONE SETTINGS
7.1. Set the Ringer Melody for Internal/External Calls
1. Press to select HS SETTINGS.
2. Press to select RING SETUP.
3. Press to select INT RING or EXT RING.
4. Press to select the desired ringer melody from
the melody list.
Note: The respective ringer melody will be played while browsing
the melody list.
5. Press
7.2. Set the Ringer Volume
1. Press to select HS SETTINGS.
2. Press to select RING SETUP.
3. Press to select RING VOLUME.
4. Press to select the desired ringer volume (a
total of 6 ringer volume levels including VOLUME OFF).
Note: The respective ringer volume will be played during your
selection.
If VOLUME OFF is selected,
icon will display.
5. Press
7.3. Adjust Earpiece and Handsfree
Volume
There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for
each of earpiece and handsfree volume.
During a call:
Press
to select volume 1-5. The current setting is shown.
When you end the call, the setting will remain at the last selected
level.
7.4. Store Direct Memory Access Number
You can store three direct access numbers into digit KEY 1, KEY
2 and KEY 3, which will be convenient for you to dial to these
numbers directly.
1. Press to select HS SETTINGS.
2. Press to select DIRECT MEM.
3. Press to select any one from KEY 1, KEY 2
and KEY 3.
4. Press and then enter the number you would like to store,
or edit the number existed before.
5. Press
Note: Press and hold , or to call the stored number.
8. REGISTRATION
Your handset and base station is pre-registered. Up to five
handsets can be registered to a single base station.
If for some reason, the handset is not registered to the base
station flashes even when the handset is near the base station),
register your handset according to the following procedure.
1. Press and hold
the base station is entered into registration mode.
2. Press to select REGISTRATION.
3. Press and you are requested to enter the 4-digit system
PIN (default PIN is 0000).
4. Enter the 4-digit system PIN.
5. Press
If the handset registration is successful, you will hear a
confirmation tone and the will stop flashing. The handset will
automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby
mode. If the handset registration is unsuccessful, the will still
flash.
9. TECHNICAL DETAILS
Free Field Range Up to 300 metres*
Indoor Range Up to 50 metres*
Handset Battery Life
(average values)
10 hours talk time**
100 hours standby**
Number of Handsets Up to 5
Intercom Mode Yes
Three-Way Conference
(1 outside correspondent +
2 internal correspondents)
Yes
Electrical Connection/Base
Mains Adaptor/Charger
Only use the adaptors supplied with
the telephone
Caution: The network voltage is
classified as a hazard by the criteria
of this standard.
Telephone Connection Appliance designed for
connection to a TNV3 class
(telecommunications network
voltage) analogue telephone line.
Batteries AAA – 1.2 V – 400 mA
Only use the batteries supplied with
the telephone.
Use any other type of battery
presents a risk of explosion.
Used batteries must be disposed
of in compliance with current
environmental protection
regulations.
Operating Temperature From 5°C to 40°C
* Values may vary according to environment.
** Depending on initial battery charge.
10. TROUBLESHOOTING
If you have difficulty with your phone, please try the suggestions
listed below.
As a general rule, if a problem occurs, remove the batteries
from all the handsets in your installation for about 1 minute,
then disconnect and reconnect the power supply to the base and
reinstall the handset batteries.
Problem Cause Solutions
No dialing
tone when
pressing
key
a. The connection
cord of the base
station is not
plugged in.
b. The adapter cord
is not plugged in
correctly in the
base station.
c. The line is busy, as
another handset is
used.
d. Wrong connection
cord.
a. Check the
connections. Unplug
and plug back in the
mains. Check that the
telephone line cord
has been plugged into
the base station and
the phone socket.
b. Check the base
station plug and the
AC plug (remove and
plug-in).
c. Wait until the line is
unoccupied.
d. Use the original
connection cord.
"OUT OF
RANGE" is
displayed.
a. Base station out of
range.
b. Base station is
not connected to
mains.
a. Reduce the range.
b. Connect base station
to mains.
The call
does not
work.
Service not activated
or wrong operator.
Check your Subscription
with network.
No display. Empty battery. Recharge battery.
The store where you bought your telephone can also provide you
with information and after-sales support.
11. SAFETY
In the event of an electrical hazard, the mains adapter acts as
AC power isolating device. It should therefore, as a precaution,
be installed close to the appliance and be easily accessible. To
disconnect the device from the primary power source, the mains
adapter must be removed from the AC socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power
failure, telephones that use cordless handsets will not work.
You will then be unable to make or receive calls in the event of
an emergency.
This is why we recommend that you also keep a conventional
telephone – one that doesn’t require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when
standing in the vicinity of the leak.
It is recommended that you avoid using this device during
electrical storms.
Do not attempt to open the batteries, as they contain chemical
substances. In the event of leakage, avoid contact with the skin,
eyes, nose and mouth. In the event of contact, rinse the affected
part for about twenty minutes with running water and seek
urgent medical attention. Clean the product with absorbent paper
or a dry cloth and contact your reseller for replacement batteries.
12. ENVIRONMENT
This symbol means that your inoperative electronic
appliance must be collected separately and not mixed
with the household waste.
This appliance has been designed and manufactured
with high quality materials and components that can be rec
ycled
and reused. Electrical and electronic appliances are liable to
contain parts that are necessary in order for the system to work
properly but which can become a health and environmental
hazard if they are not handled or disposed of in the proper way.
Consequently, please do not throw out your inoperative appliance
with the household waste.
If you are the owner of the appliance, you must deposit it at the
appropriate local collection point or leave it with the vendor when
buying a new appliance.
- If you are a professional user, please follow your supplier's
instructions.
- If the appliance is rented to you or left in your care, please
contact your service provider.
Keen to preserve the environment, ATLINKS has equipped
this appliance with a switching power supply, offering better
energy efficiency. The advantages include not only very low
electricity consumption, but also a more compact format than the
conventional power supply units used by the previous range.
The used batteries from your telephone (if it has batteries)
must be disposed of in compliance with current environmental
protection regulations. Comply with your local regulations.
Return your batteries to your reseller or dispose of them at an
approved recycling centre.
Help us protect the environment in which we live!
www.alcatel-home.com
ATLINKS Europe
22 quai Gallieni
92150 Suresnes- France
© ATLINKS 2015 - Reproduction prohibited.
The Manufacturer reserves the right to modify the specifications
of its products in order to make technical improvements or
comply with new regulations.
ALCATEL and ATLINKS are registered trademarks.
The Alcatel logo and Alcatel name are trademarks of Alcatel Lucent
and used under licence by ATLINKS.
with wa
1.1. Handset Overview
User’s Guide
using the handset for the frist time. The handset will give a
Press
In Keeping with our evironmental preservation and compliance
commitment, we include mini-guides in our packaging.
BEFORE TO USE YOUR PHONE, PLEASE READ ALL THIS USER'S GUIDE
C
M
Y
CM
MY
CY
CMY
K
Steadily on when the handset is in range of the base.
Flash when out of range of the base or not registered to
the base.
Steadily on when an intercom is in progress.
Flash when there is an incoming internal call.
Indicate a call is in progress.
Indicate that handsfree is being used.
Steadily on when an alarm is set.
Flash when the alarm time set before reaches.
Indicate that the keypad is locked.
Indicate when there are received new Voice Message
Waiting (VMWI) not yet read.
Disappear when all the voice messages have been read.
(Network service dependent)
Indicate that the ringer is switched off.
Indicate when the battery is fully charged.
Whole icon flashes when the battery performs initial
charging.
Internal block icon flashes when the battery is in final
charging stage.
Indicate when the battery needs charging.
Flash when low battery power level is detected.
Indicate when more characters are existed before the text
currently displayed.
Indicate when more characters are existed after the text
currently displayed.
Indicate when new call.
Turn off when new call has been read.
Scroll up/down the menu items/Phonebook list/Redial list/
Call List.
F370 F370 F370
or
or
and
and
and
and
and
and
and
and
and
and
and
and
and
and