User Manuals
8
2.4 How to connect in Wi-Fi mode
Step 1:
Enabling Wi-Fi on your Cat4 Router.
When the Wi-Fi indicator is solid blue, Wi-Fi is enabled.
Step 2:
Recording the SSID and Wi-Fi Key.
The default SSID and Wi-Fi key are printed on the device label, situated on the
underside of your Cat4 Router.
To prevent unauthorized parties from accessing your Wi-Fi network, it is
recommended that you change the SSID and Wi-Fi key from me to me. For
more information, please refer to the User Guide which can be accessed via
the Web User Interface.
XXXXXXXXX
Step 3:
Seng up a Wi-Fi connecon
1) From your Wi-Fi enabled client, perform a scan for wireless networks.
2) Connect to the network name that matches the SSID found on the device
label.
3) When prompted for a password, enter the Wi-Fi key found on the
device label (this is case sensitive). Your client will notify you when it is
connected.
Your client must support WPS. There are 3 ways to set up a WPS connecon.
: WPS buon
1) Ensure that Wi-Fi is enabled on the client and enable WPS.
2) Press and hold the WPS buon for 3 seconds. The Wi-Fi LED will begin to
ash blue.
3) Your device should then automacally connect.