User Manuals

9
1) Enable the WPS funcon on your smart device (only Android devices are
supported) and note the WPS key.
2) Open the WPS page on your Web User Interface (Go to

>
Wi-Fi
>
WPS
).
3) Enter the WPS key on the WEB User Interface and click
Apply
.
4) Your device should then connect automacally.

1) Open the WPS page on your Web User Interface (Go to

>
Wi-Fi
>
WPS
).
2) Click on

.
3) Click
Apply
. WPS is now enabled for 2 minutes.
4) Enable WPS on your client and it should automacally connect.