User Manuals
16
5.1.3
You can set the network search mode to either Auto or Manual, and change
the network mode to Auto, 2G only, 3G only, or 4G only. Make sure that you
click
Apply
aer making any changes.
5.1.4
Here you can set your monthly data plan, set a data limit, configure auto-
disconnect sengs, etc.
5.2 WAN
5.2.1 WAN status
Here you can view detailed information on the wide area network (WAN),
including IP address, subnet mask, gateway, DNS server, etc.
5.2.2
Set up the WAN connection mode and parameters here. You can set the
connecon mode to PPPoE, DHCP or stac IP.
PPPoE:
PPPoE stands for Point-to-Point Protocol over Ethernet. This is a
network protocol that is mainly used for DSL services whereby individual users
connect to a modem using an Ethernet connection. Enter the username and
password provided by your network service provider and click
Apply
.
DHCP:
Dynamic Host Configuration Protocol (DHCP) is a client /server
protocol that automatically provides you with an Internet Protocol (IP) host.
The IP address and related configuration settings such as subnet mask and
default gateway are all automacally assigned. Select DHCP and click
Apply
.
Access the internet using a xed IP address, subnet mask, gateway IP
address and Primary DNS server. These should all be provided by your network
service provider.
5.2.3 MAC Clone
Using the MAC Clone funcon, mulple clients can connect to the Cat4 Router
and access the internet.
Your current MAC address is displayed here. Click
to set a new MAC
address. Click
Clone
to copy your host MAC address.