User Manuals
24
For a Windows device:
1) Right-click
on the task bar.
2) Select the network name (SSID) of your Cat4 Router, click
Connect
, and
enter the Wi-Fi key.
For Mac:
1) Click the AirPort icon.
2) Select the network name (SSID) of your Cat4 Router from the drop-down
menu and enter the Wi-Fi key.
Make sure you have entered the correct Wi-Fi key.
When there is no SIM, no service, or the device is not registered to the
network, the network indicator on Cat4 Router is solid red.
1) If using a SIM:
- Make sure the SIM is valid and inserted correctly.
- Move the Cat4 Router to an area with a beer signal (try placing it near a
window).
2) If using an ethernet connecon, check if the network is working properly.
IP address conflict could happen when a computer is using multiple types
of internet connections. For example, the computer may be connected to
the Cat4 Router via an ethernet cable and another network via Wi-Fi. If IP
addresses are the same, you may be unable to log in Cat4 Router home page
due to an IP address conict.
Follow the steps below to make sure the device is set up correctly:
1) Check the device to see if the Wi-Fi indicator is on or o.
2) Refresh the network list on your computer.
For Windows:
1) Click the Refresh Network icon on the right top corner of the Wireless
Network Connecon screen.
2) Right-click
.
3) Click
.