User Manual
Contents Safety precautions.......................................................................................................................3 1.. Web UI configuration.............................................................................................................4 1.1. Log into the configuration page........................................................................................4 1.2. Icon description..................................................................................
Safety precautions Read the safety precautions carefully to ensure the correct and safe use of your wireless device. Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft.
They are also compliant to the ecodesign directive 2009/125/EC. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. 1. Web UI configuration 1.1 Log into the configuration page Open the browser and enter this address http://192.168.1.1. The default login password is admin. 1.
2.2 Usage information A current usage time and data is displayed: Total time duration for current connection in HH:MM (e.g: 12Hrs 02 Mins). Total data for current connection in MB or GB. 2.3 Signal & technology information Signal icon: Shows the signal strength. The icon is grey when there is no service. Network technology: 2G, 3G, 3G+, 4G in different networks. Icon is empty in disconnected and no service status. 2.4 Battery information Low power. Different battery levels. 2.
4. Message Click the SMS area to enter the Message interface, the following items are included: +New message: Create new SMS. Draft: Save the unsent SMS. : Delete SMS. : Send SMS fail. : Option Menu. • SMS settings. • Delete all messages. Read/Reply/Forward SMS Double click a message to read the entire message. At the same time a SMS box is displayed for Reply/Forward. 5. Settings Click Settings to enter the Settings area and the following items are included.
Profile management: Edit your profile. PIN Code Settings: PIN operation: include three behaviours: Enable/Disable/Modify. Note: • When you entered the wrong PIN 3 times, PUK is needed. You can get this key from the operator. • PIN code: 4-8 digits. Connection mode: Automatic or Manual at draw down list. Network mode: Auto, 2G only, 3G only, 4G only modes in draw down list. Advanced Settings DHCP • Router IP Address: The router’s IP address on the LAN. The default setting is “192.168.1.1”.
. Battery charging Wall Charger charging When the device powers off, it will take a maximum of 3 hours to fully charge. USB Cable charging Charge the device by connecting it to a PC with the USB cable. When the device powers off, it will take a maximum of 4 hours to fully charge. 9. Warranty The device is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1.
In no event shall the manufacturer be liable for incidental or consequential damages of any nature whatsoever, including but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. 10. Q&A 1. 2. 3.
zz Check the device Status Display for error messages or information. zz Refresh your network list on your computer. Windows: Click Refresh Network List on the left side of the Wireless Network Connection screen. If that does not work you can try the following: 1. Open Network Connections. 2. Right-click Wireless Network Connection and select Properties. 3. Click the Wireless Networks tab. 4. Delete any unused wireless connections from the Preferred Networks list and click OK. 5. Restart your computer. 8.
. Warning and precautions Electronic Device Turn off your device near high-precision electronic devices. The wireless device may affect the performance of these devices. Such devices include hearing aids, pacemakers, fire alarm system, automatic gates, and other automatic devices can be affected. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
• When switched on, this device emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags. To ensure that there is no problem, do not place this device on top of the dashboard or within an airbag deployment area. • Check with your car dealer or the car manufacturer to make sure that the dashboard is adequately shielded from this device RF energy. Conditions of Use • Switch this device off before boarding an aircraft.
Radio Waves Proof of compliance with international standards (ICNIRP) or with European Directive 2014/53/ EU (RED) is required of all modem models before they can be put on the market. The protection of the health and safety for the user and any other person is an essential requirement of these standards or this directive. THIS DEVICE MEETS INTERNATIONAL GUIDELINES FOR EXPOSURE TO RADIO WAVES. This device is a radio transmitter and receiver.
General information Internet address: www.alcatel-mobile.com Hot Line Number: see “SERVICES” leaflet or go to our website. Manufacturer: TCL Communication Ltd. Address: 5/F, Building22E, Science Park West Avenue, Hong Kong Science Park, Pak Shek Kok, Hong Kong. This radio equipment operates with the following frequency bands and maximum radio-frequency power: LTE B1/B3/B7/B8/B20: 23dBm UMTS/HSDPA/HSDPA+/HSUPA B1/B3/B8: 23dBm GSM900: 32.5dBm GSM850: 32.5dBm GSM1800: 29.5dBm GSM 1900: 29.
