MOVEBAND Display Quick Start Guide CJB1HD0LCAAA
About the MOVEBAND Display MOVEBAND Display tracks your daily fitness activity and sleep data, allows you to set your own targets and then motivates you achieve these goals, enabling you to live a healthier life. Note: MOVEBAND Display can be separated from wristband. Wearing your MOVEBAND Display 1. Insert the display into the wristband, taking care that it is oriented as shown below: 2. Pass the wristband strap through the loop.
. While wearing the wristband as shown below, clasp the buckle to close it. Pairing with your phone Step 1: Installing the TCL MOVEBAND app. You can download and install the TCL MOVEBAND app in the following ways: • Search “TCL MB20G” in the Google Play Store (For Android). • Search “TCL MB20G” in the App Store (For IOS). • Scan the following QR code.
Step 2: Connecting MOVEBAND to your phone via Bluetooth. 1. Create an account. 2. Input your personal information before use, including gender, height, weight, and age so as to ensure data accuracy. 3. Turn on Bluetooth to search for your band. 4. Enter the 6 digit verification code displayed on your band. 5. Confirm and pair the application with your band. Note: One band can pair with multiple accounts, but only one each time.
Charging Remove the MOVEBAND Display from the wristband and place inside the charging dock. Plug the USB port into a computer or USB charger for power. 2 1 Charging 1 2 Charge complete Notes: • Following air regulation, the battery of your product is not charged. Charge it first before using. • If the charging port is corroded or dirty, it will seriously affect the charging process. After playing sports, wipe away any sweat or dirt from your band before charging.
• Long press for 3 seconds to power off your MOVEBAND Display when charging. for 8 seconds to restart your MOVEBAND • Long press Display. Health and safety information All users should read the following warnings before using MOVEBAND Display to reduce the risk of personal injury, discomfort or property damage. Review the hardware and software recommendations for use of the band. Risk of discomfort may increase if recommended hardware and software is not used.
Environment You alone are responsible for how you use your band and any consequences of its use. Use of your band is subject to safety measures designed to protect users and their environment. • Always treat your band with care and keep it in a clean and dust-free place. • Do not expose your band to liquid, moisture or high humidity. • Do not drop, throw or try to bend your band. • Do not use harsh chemicals, cleaning solvents, or aerosols to clean your band. • Do not paint your band.
This symbol on device means that these products must be taken to collection points at the end of their life: - Municipal waste disposal centres with specific bins for these items of equipment. - Collection bins at points of sale. They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO THE INSTRUCTIONS.
We hereby point out that the end user warranty for infringement IPR is solely limited to the EU/EEA/Switzerland. If and to the extent that the Product is exported, taken with, or used by end customer or end user outside the EU/EEA/ Switzerland any responsibility, warranty or indemnification of manufacturer and its suppliers in regard to the Product expires (including any indemnification in regard to infringement IPR). General information • Internet address: www.tclcom.
The description of accessories and components, including software, which allow the radio equipment to operate as intended, can be obtained in the full text of the EU declaration of conformity at the following internet address: http://www. tclcom.com/wearables/EU_doc. Warranty The device is warranted against any deviation from technical specifications for a period of twelve (12) (1) months from the date specified on your original invoice.
4) Accidents or consequences of theft of the vehicle in which this device is transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids, inclement weather. 5) Connecting to or integrating into this device any equipment not supplied or not recommended by the manufacturer. 6) Any servicing, modification or repair performed by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre.