Installation guide

Product Specifications 49
Appendix C
Interfaces
(Electrical):
z 2 x 10/100 Base-TX RJ-45 auto-sensing Ethernet
interfaces:
Port 0
z Auto-sensing MDI/MDX
z Power Over Ethernet 48V DC / 250mA
(802.3af compliant)
z Serial Over Ethernet
Port 1
z Auto-sensing MDX
z Power Over Ethernet 48V DC / 250mA
(802.3af compliant)
z Redundant Ethernet Data Link and Power Over
Ethernet
z Secure-Jack wired port security (when
deployed with a Wireless LAN Switch)
z Serial Over Ethernet
z 1 x 5V DC Power Interface
z USB ver 2.0 Interface
Interfaces
(Mechanical):
z Standard Kensington MicroSaver Security Cable
Interface (cable not supplied)
z Wall, wall gang box, ceiling mount kit interface
(optional - part number AP70-MNT)
Visual Indicators
(LEDs)
z Ready -- Power on/off
z Ethernet (0/1) Link status / Activity
z (Radio Mode) 802.11a +b/g access point/air mon-
itor mode
Power
Requirements
z External AC power or POE
z 5V DC / 3A supplied externally via optional, coun-
try-specific AC adapter kits
z 48V DC / 250mA Power Over Ethernet (802.3af
compliant)
Output Power 100 mW maximum (or lower as configured on the
Alcatel Wireless LAN Switch to comply with local
regulatory requirements)
TABLE 3-2 Alcatel AP70 Characteristics (Continued)
Description