User guide

Using the CLI Application Example
OmniSwitch 6250/6450 Switch Management Guide May 2012 page 6-26
4 Press the spacebar <sp> key to execute the filter option. The following is displayed.
Enter filter pattern: *vlan*
8193 dot1qBase vlan
8194 dot1qVlan vlan
8195 dot1qVlanCurrentTable vlan
8196 dot1qVlanStaticTable vlan
8197 vlanMgrVlanSet vlan
8198 vlanTable vlan
8199 vpaTable vlan
9217 vCustomRuleTable vlan
9218 vDhcpGenericRuleTable vlan
9219 vDhcpMacRuleTable vlan
More? [next screen <sp>*, next line <cr>*, filter pattern </>*, quit <q>]
The screen displays ten table rows, each of which contain the text pattern “vlan”. Alcatel-Lucent CLI uses
a single level command hierarchy. (The screen rows shown above and below the table are not counted as
part of the 10 rows.) If you want to display the rows one line at a time, press Enter instead of the space bar
key. To exit the table, type the “q” character and the CLI exits the more mode and return you to the
system prompt.