User guide

Managing Switch User Accounts Overview of User Accounts
OmniSwitch 6250/6450 Switch Management Guide May 2012 page 9-11
How User Settings Are Saved
Unlike other settings on the switch, user settings configured through the password command are saved to
the switch configuration automatically. These settings are saved in real time in the local user database.
At bootup, the switch reads the database file for user information (rather than the boot.cfg file). The write
memory, copy running-config working, or configuration snapshot commands are not required to save
user or password settings over a reboot.
Note. Password settings configured through the user password-policy commands are not automatically
saved to the switch configuration.
For information about using the write memory, copy running-config working, and configuration
snapshot commands, see Chapter 5, “Managing CMM Directory Content,” Chapter 7, “Working With
Configuration Files,” and the OmniSwitch 6250/6450 CLI Reference Guide.