User guide

SNMP Trap Information SNMP Traps Table
OmniSwitch 6250/6450 Switch Management Guide May 2012 page B-27
169
alaSaaEthIterationCompleteTrap
alaSaaCtrlOwn-
erIndex,
alaSaaCtrlT-
estIndex,
alaSaaEthoam-
ResultsT-
estRunIndex,
alaSaaCtrlLas-
tRunResult,
alaSaaCtrlLas-
tRunTime
system This trap is sent is sent when a
Eth-LB or Eth-DMM SAA itera-
tion is completed.
alaSaaCtrlOwnerIndex—An owner name to identify entries in the table. This is currently not supported and
its value will always be the string 'USER'.
alaSaaCtrlTestIndex—A unique name to identify the entries in the table. The name is unique across various
SNMP users.
alaSaaEthoamResultsTestRunIndex—Identifies the row entry that reports results for a single Eth-LB/DMM
test run. The value of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
alaSaaCtrlLastRunResult—The result of the latest SAA test iteration: 1 - Undetermined, 2 - Success, 3 -
Failed, 4 - Aborted.
alaSaaCtrlLastRunTime—The date and time at which the last iteration of the SAA was run..
170
alaSaaMacIterationCompleteTrap
alaSaaCtrlOwn-
erIndex
alaSaaCtrlT-
estIndex,
alaSaaMacRe-
sultsTestRun-
Index,
alaSaaCtrlLas-
tRunResult,
alaSaaCtrlLas-
tRunTime
system This trap is sent is sent when a
MAC SAA iteration is
completed.
alaSaaCtrlOwnerIndex—An owner name to identify entries in the table. This is currently not supported and
its value will always be the string 'USER'.
alaSaaCtrlTestIndex—A unique name to identify the entries in the table. The name is unique across various
SNMP users.
alaSaaMacResultsTestRunIndex—Identifies the row entry that reports results for a single test run. The value
of this object starts from 1 and can go upto a maximum of alaSaaCtrlMaxHistoryRows.
alaSaaCtrlLastRunResult—The result of the latest SAA test iteration: 1 - Undetermined, 2 - Success, 3 -
Failed, 4 - Aborted.
alaSaaCtrlLastRunTime—The date and time at which the last iteration of the SAA was run.
171
aaaHicServerChangeTrap aaaHSvrIpAd-
dress,
aaaHSvrCurrI-
pAddress
aaa This trap is sent when the active HIC
server is changed from.to primary.
aaaHSvrIpAddress—The HIC/Rem/WebDL server's IP address.
aaaHSvrCurrIpAddress—The current active HIC server's IP address.
172
aaaHicServerUpTrap
aaaHSvrIpAd-
dress,
aaaHSvrRole,
aaaHSvrName
aaa This trap is sent when at least one
of the HIC servers comes UP.
No. Trap Name Objects Family Description