Quick Start Guide CJB1B30ALAAB
www.sar-tick.com This product meets applicable national SAR limits of 2.0W/kg. The specific maximum SAR values can be found in the Radio Waves section of this user guide. When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 5 mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not surfing internet.
Switch off your device in an aircraft. The device may cause interference to aircraft control signals. Switch off your device near high-precision electronic devices. The device may affect the performance of these devices. Do not attempt to disassemble your device or its accessories. Only qualified personnel are allowed to service or repair the device. Do not place your device or its accessories in containers with a strong electromagnetic field. Do not place magnetic storage media near your device.
CHARGERS Mains powered chargers will operate within the temperature range of: 0°C to 40°C. The chargers designed for your device meet with the standard for safety of information technology equipment and office equipment use. They are also compliant to the ecodesign directive 2009/125/EC. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction. They should be used for this purpose only. 1.
1.2 Application PC Smart phone PAD 1.
Number Description ③ LED light ④ Micro USB Interface Use the device’s 2 buttons as follows: Button ① Power On/Off Description Long press to turn on/off the device Short press to put the LED in either active or sleep mode. Long press to turn on WPS ② WPS Short press to put the LED in either active or sleep mode 1.4 Turning on the device Step 1: Open back cover from Bottom of right corner, then take out battery and put SIM card as remark. Step 2: Long Press the Power On/Off button.
1.
Step 1: Use the Wi-Fi manager on the Wi-Fi embedded device to select network name (SSID). • From a Windows PC: Right-click Wireless network connection on the task bar, and select: View Available Networks. Choose SSID from the list of available networks. • From a Mac computer: Select System Preferences -> Network -> Airport. Click “Advanced” to choose SSID from the list of available networks. • From an iOS device: Settings -> Wi-Fi. Choose SSID from the available networks.
3. Charging the device You have two ways to charge your device. Wall Charger charging: Connect USB cable with Charger head and device, then charging begin. When the device is powered off, charging will take a maximum of 3 hours. USB Charger charging You can also charge the device by connecting it to a PC with the USB cable. When the device is powered off, charging will take a maximum of 4 hours. Note: In order to protect the battery, when low power LED indicator flash, please charge the device. 4.
They will then be recycled, preventing substances being disposed of in the environment, so that their components can be reused. In European Union countries: These collection points are accessible free of charge. All products with this sign must be brought to these collection points.
an independent scientific organization (ICNIRP) and include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
The World Health Organization has stated that present scientific information does not indicate the need for any special precautions for the use of mobile devices. They recommend that if you are interested in further reducing your exposure then you can easily do so by limiting your usage or keep the device away from the head and body. For more information you can go to www.alcatelonetouch.
2) Not being compliant with technical and safety standards applicable in the geographical area where this device is used, 3) Improper maintenance of sources of energy, and of the overall electric installation, 4) Accidents or consequences of theft of the vehicle in which this device is transported, acts of vandalism, lightning, fire, humidity, infiltration of liquids, inclement weather, 5) Connecting to or integrating into this device any equipment not supplied or not recommended by the manufacturer, 6) Any
but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law. Some countries/states do not allow the exclusion or limitation of incidental or consequential damages, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. Alcatel is a trademark of Alcatel-Lucent used under license by TCL Communication LTD. All rights reserved © 2014-2016 TCL Communication LTD.
LINK APP Freely download the App that helps you remotely control LINK mobile WiFi Android version iOS version Note: LINK APP and Web UI share same password.