Operation Manual

11
the network. The default setting is “Enable”.
 DHCP IP Pool: Set a range of IP addresses available to access.
 DHCP Lease Time: Amount of time that a Wi-Fi enabled device can use its
assigned IP address before it is required to renew the lease.
MAC Filtering:
MAC filtering is used to control specific MAC addresses to access.
 Select “Disable" : All terminal devices are allowed to access the network.
 Select “Enable": Only devices in this list are allowed to access the network.
You can add, edit or delete the configuration.
Note: The maximum allowed MAC list is 10.
5.4 Language
Change language:
1,Choose the language, ;
2, Click <Apply>.
The default language is English.
5.5 System
Reboot:
Click Reboot button from Web page directly or Click the hardware Reboot button under
the back cover to restart the device.
Note: R button at the back of the device, next to the SIM slot only Reboot the device
Reset:
Reset the device to the original factory settings.
1. Press and hold the Power and WPS together until device Powers Off.
2. Device will Power back on itself
3. Full reset of the device should have been completed
How to save the configuration:
1. Click Backup
2. Select the location to save current settings
Restore the configuration
1,Click <Restore>;
2,Select a file saved previously to restore the settings.
6 Battery Charging