System information

Main Menu
2-5
Device Control Menu
Port Configuration Enables any port, enables/disables flow control, and sets
communication mode to auto-negotiation, full duplex or half duplex.
Port State Displays operational status, including link state, flow control method,
and duplex mode.
Spanning Tree Configuration Enables Spanning Tree Algorithm; also sets parameters for hello time,
maximum message age, switch priority, and forward delay; as well as
port priority, path cost, and fast forwarding.
Spanning Tree Information Displays full listing of parameters for the Spanning Tree Algorithm.
Mirror Port Configuration Sets the source and target ports for mirroring.
Port Trunking Configuration Specifies ports to group into aggregate trunks.
IGMP Configuration Configures IGMP multicast filtering.
BStorm Control Configuration Allows you to enable/disable broadcast storm control on a per-port basis
and set the packet-per-second threshold.
Port Security Configuration Allows you to enable and configure port security for the switch.
Extended Bridge Configuration Displays extended bridge capabilities provided by this switch.
802.1P Configuration Configures default port priorities and queue assignments.
802.1Q VLAN
Base Information
Displays basic VLAN information, such as VLAN version number and
maximum VLANs supported.
802.1Q VLAN Current Table
Information
Displays VLAN groups and port members.
802.1Q VLAN Static Table
Configuration
Configures VLAN groups via static assignments, including setting port
members, or restricting ports from being dynamically added to a port by
the GVRP* protocol.
802.1Q VLAN
Port Configuration
Displays/configures port-specific VLAN settings, including PVID,
ingress filtering, and GVRP*.
Port GARP Configuration* Configures settings used in multicast filtering.
Port GMRP Configuration* Configures GMRP multicast filtering.
Network Monitor Menu
Port Statistics Displays statistics on network traffic passing through the selected port.
RMON Statistics Displays detailed statistical information for the selected port such as
packet type and frame size counters.
Unicast Address Table Provides full listing for unicast addresses, as well as search and clear
functions.
Multicast Address Registration
Table*
Provides full listing for multicast addresses, as well as search and clear
functions.
IP Multicast Registration Table Displays all the multicast groups active on this switch, including
multicast IP addresses and corresponding VLAN IDs.
Static Unicast Address Table
Configuration
Used to manually configure host MAC addresses in the unicast table.
Static Multicast Address Table
Configuration*
Used to manually configure host MAC addresses in the multicast table.
Reset System Menu Restarts system with options to use POST, or to retain factory defaults,
IP settings, or user authentication settings.
Quit Current Session Exits the configuration program.
*
Not implemented in this firmware release.
Menu Description