System information

Web-Based Management
3-12
Trap Managers
The following figure and table describe how to specify management stations that will
receive authentication failure messages or other trap messages from the switch. Up
to 5 trap managers may be entered.
Security Configuration
Use the Security Configuration screen to restrict management access based on a
specified password. The Administrator has write access for parameters governing
the SNMP agent. You should therefore assign a password to the default
Administrator as soon as possible, and store it in a safe place. (If for some reason
your password is lost, or you cannot gain access to the system’s configuration
program, contact Alcatel Technical Support for assistance.)
Change Password
This password is for the system Administrator, with access privilege of Read/Write
for all screens. Passwords can consist of up to 11 alphanumeric characters and are
not case sensitive. (The default user name is “admin” and the default password is
“switch.”)
Parameter Description
Trap Manager Capability Up to 5 trap managers may be used.
Trap Manager
IP Address
IP address of the trap manager.
Trap Manager Community
String
A community authorized to receive trap messages.
Add/Remove Add/remove strings from the active list.
Enable Authentication
Traps
Issues a trap message to specified IP trap managers whenever authentication of
an SNMP request fails.
Default: enabled