User guide

.Fixed Problem Reports
OmniSwitch 6600/7000/8800—Release 5.1.5.R04 page 27
OmniSwitch 7000 NIs
PR 62382
Under heavy traffic, if a remote switch is either reloaded or the backbone NI is reset, the WebView and
telnet connection to this switch might hang and no access will be available until the sessions timeout.
OmniSwitch 8800 Feature Exceptions
Redundancy / Hot Swap
Fixed Problem Reports
PR 83682
When a Xenpak module is "hot-inserted" with the power applied to the board, the link sometimes does not
come up.
PR 84365
After takeover, the status of NI remains DOWN if it got a message, "Time out waiting for
ESM_ENI_RCVD_SLOTINFO", on the console on an OS6600.
PR 86033
Fpga or miniboot/bootrom upgrades are not supported on a dual CMM switch on the OS7000/8800.
Advanced Routing