User guide

New Hardware Supported
page 8 OmniSwitch 6600/7000/8800—Release 5.1.5.R04
Note: The following new hardware became available in release 5.1.5.R02 and is supported subject to
the feature exceptions and problem reports described later in these release notes:
New Chassis
OS6600-P24
The OS6600-P24 (OS6600-P24) is a stackable edge/workgroup switch offering 24 Power over Ethernet
(PoE) 10/100 Ethernet ports. The OS6600-P24 can also be equipped with up to four Gigabit Ethernet ports
for connections to a high speed backbone or server.
In addition to working as an individual, stand-alone switch, the OS6600-P24 can also be linked together
with any other member of the OmniSwitch 6600 Family of switches to form a single, high-density virtual
chassis known as a stack consisting of up to eight (8) switches in any combination within the stack.
OS6602-24
The OS6602-24 is a stackable edge/workgroup switch offering 24 10/100 Ethernet ports. The OS6602-24
has two Gigabit Ethernet SFP ports for connections to a high speed backbone or server and two ports for
stacking switches.
In addition to working as an individual, stand-alone switch, the OS6602-24 can also be linked together
with any other member of the OmniSwitch 6600 Family of switches to form a single, high-density virtual
chassis known as a stack consisting of up to eight (8) switches in any combination within the stack.
OS6602-48
The OS6602-48 is a stackable edge/workgroup switch offering 48 10/100 Ethernet ports. The OS6602-48
has two Gigabit Ethernet SFP ports for connections to a high speed backbone or server and two ports for
stacking switches.
In addition to working as an individual, stand-alone switch, the OS6602-48 can also be linked together
with any other member of the OmniSwitch 6600 Family of switches to form a single, high-density virtual
chassis known as a stack consisting of up to eight (8) switches in any combination within the stack.
New Backup Power Supplies (BPSs)
Note: The following BPSs became available in release 5.1.5.R02:
OS6600-BPS-P
The OS6600-BPS-P unit is the OS6600-P24’s backup power supply, which provides backup electrical
current used for switch functions and PoE ports. The OS6600-BPS-P contains two built-in power
supplies—one supplying 55 Watts (100 Watts maximum) for switch functions and the other supplying 210
watts for PoE functions.
OS6602-BPS
The OS6600-BPS is an AC backup power supply for OS6602-24 and OS6602-48 switches. The backup
power supply bay is located on the chassis rear panel of OS6602-24 and OS6602-48 switches.