ALCATEL-LUCENT OmniSwitch 6850 Series Technical Document
Table of Contents OmniSwitch 6850 Series____________________________________________________________________________ 2 Introduction ___________________________________________________________________________________ 2 Power Options ________________________________________________________________________________ 3 OmniSwitch 6850-24 ________________________________________________________________________ 3 OmniSwitch 6850-24 Specifications ___________________________________________________________ 3 OmniSwi
OmniSwitch 6850 Series Introduction As Enterprises search for competitive advantages in the market place and become increasingly dependent on their networks to conduct business, new network requirements have rapidly emerged, exceeding the capabilities of successive technological advancements.
Power Options The OS6850 family offers customers a vast selection of switches and power options that will accommodate most needs. By providing both 24- and 48-port PoE and non-PoE models with multiple power supply options such as AC and DC options as well as backup power supplies, network administrators can prevent over or under provisioning power to their switches and save money by not having to purchase more than they need.
Altitude Operating altitude: sea level at 40 degrees, Celsius and 10000 feet at 0 degrees, Celsius Storage altitude: sea level to 40000 feet 802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u 10 or 100Mbps (full or half duplex) 1 Gigabit per second (full duplex) 1 Gigabit per second (full duplex) 9,216 bytes 4.1.
Operating Temperature Storage Temperature Altitude 0 to 45 degrees Celsius -20 to 70 degrees, Celsius Operating altitude: sea level at 40 degrees, Celsius and 10000 feet at 0 degrees, Celsius Storage altitude: sea level to 40000 feet 802.3z, 803.2ab, 1000BASE-T, IEEE 802.3u 10 or 100Mbps (full or half duplex) 1 Gigabit per second (full duplex) 1 Gigabit per second (full duplex) 9,216 bytes 4.1.
Chassis Depth 10.5 inches without power supplies installed 16.75 inches with power supplies installed. 14 lbs. (6.24 kg) without the power supply 5% to 90% Relative Humidity (Operating) 0% to 95% Relative Humidity (Storage) 0 to 45 degrees Celsius -20 to 70 degrees, Celsius Operating altitude: sea level at 40 degrees, Celsius and 10000 feet at 0 degrees, Celsius Storage altitude: sea level to 40000 feet 802.3z, 803.2ab, 1000BASE-T, IEEE 802.
Weight Humidity 14 lbs. (6.24 kg) without the power supply 5% to 90% Relative Humidity (Operating) 0% to 95% Relative Humidity (Storage) 0 to 45 degrees Celsius -20 to 70 degrees, Celsius Operating altitude: sea level at 40 degrees, Celsius and 10000 feet at 0 degrees, Celsius Storage altitude: sea level to 40000 feet 802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u 10 or 100Mbps (full or half duplex) 1 Gigabit per second (full duplex) 10 Gigabits per second (full duplex0 9,216 bytes 4.1.
Chassis Depth 10.5 inches without power supplies installed 16.75 inches with power supplies installed. 14 lbs. (6.24 kg) without the power supply 5% to 90% Relative Humidity (Operating) 0% to 95% Relative Humidity (Storage) 0 to 45 degrees Celsius -20 to 70 degrees, Celsius Operating altitude: sea level at 40 degrees, Celsius and 10000 feet at 0 degrees, Celsius Storage altitude: sea level to 40000 feet 802.3z, 802.3ab, 1000BASE-T, IEEE 802.3u, IEEE 802.
Total shared 1000BASE-X “combo” ports per switch (ports 1-4) Total 10/100/1000BASE-T ports per stack Total combo SFP slots per stack Power Supply Flash Memory size RAM Memory size Overall Width (rack-mount flanges included) Chassis Width (rack-mount flanges not included) Height Height (rack units) Chassis Depth Weight Humidity Operating Temperature Storage Temperature Altitude Standards supported Data rate (RJ-45 Ports) Data rate (SFP ports) Maximum frame size Connections supported Cables supported Power
• (4) Combo SFP slots for 1000Base-X connections • (2) 10 Gigabit XFP slots • Console port (RJ-45) • USB port (USB 2.
Maximum cable distance (RJ-45 ports) is 230 watts. Using the 510watts P/S, the maximum available PoE power is 380watts. 100 meters OmniSwitch 6850-P48X The OmniSwitch 6850-P48X is a stackable edge/workgroup switch offering 48 unshared 10/100/1000Base-T Power over Ethernet (PoE) ports and two (2) 10 Gigabit XFP slots.
Power supplied to port Maximum cable distance (RJ-45 ports) EIA/TIA 568 or shielded twisted-pair (STP), Category 5, 100 ohm 1000BaseT: unshielded twisted-pair (UTP), Category 5e Default 15.4watts per port Configurable from 3watts to 20watts per port Using the 360watts P/S, the maximum available PoE power is 230 watts. Using the 510watts P/S, the maximum available PoE power is 380watts.
The 10G-XFP-LR is a long-reach 10-Gigabit optical transceiver that supports single mode fiber over 1310 nm wavelengths. The 10G-XFP-LR supports 10-micron fiber up to a maximum distance of 10 kilometers. The 10G-XFP-SR is a short-reach 10-Gigabit optical transceiver that supports multimode fiber over 850 nm wavelengths. The 10G-XFP-SR supports 50/62.5 micron fiber up to a maximum distance of 300 meters (depending on the grade of fiber used).
PPeerrffoorrm maannccee Raw Fabric Capacity Stacking Capacity & Throughput Throughput Performance Or Forwarding Rate Per Stand-Alone Switch Assuming: All traffic is forwarded through The Switch Fabric ASIC And where applicable: o Including the 2-port 10GigE uplink module throughput o Stacking (Stack A & Stack B) throughput Performance • OS6850-48: 92Gbps Full Duplex or 184Gbps aggregate • OS6850-48X: 112Gbps Full Duplex or 224Gbps aggregate • OS6850-P48: 92Gbps Full Duplex or 184Gbps aggregate • OS68
Management: Alcatel-Lucent OmniVista 3.0.0 or later releases support s the OS6850 platforms. Configuration Mode Command Line Interface (CLI), Telnet/SSH for remote CLI access, Web-based (HTTP/HTTPS) and SNMPv1/v2c/v3 for complete NMS integration 4.1.
SCP (secure copy) SFLOW Interswitch Protocols 4.1.6 8 sessions are supported per standalone switch and stack An aggregable port of a link aggregation group cannot be a mapped port and vice versa A mirrored port cannot be a mapped port and vice versa A mobile port cannot be configured as a network port of a mapping session “SCP” command can be used to get/put the file from/to the server.
H Hiigghh A Avvaaiillaabbiilliittyy The Alcatel-Lucent AOS OmniSwitch product family has been designed from its inception to provide carrier-class availability to meet the needs of missioncritical, IP Communications, and converged network environments. With the increasing importance of networks carrying voice and real-time applications, there is an increased need for availability that reaches across the network links and end user devices.
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) Static (OmniChannel) Link Aggregation 4.3.7 Alcatel-Lucent OmniSwitch 6850 Series The Alcatel-Lucent Multiple Spanning Tree (MST) implementation provides support for the IEEE 802.1s Multiple Spanning Tree Protocol (MSTP). In addition to the 802.1D Spanning Tree Algorithm and Protocol (STP) and the 802.
Dynamic (IEEE 802.
EEm mbbeeddddeedd SSeeccuurriittyy Alcatel’s AOS OmniSwitch product family provides organizations with easy, robust and optimal ways to control access to individual infrastructure components and to the individual resources resident on the network both internally and externally. Hence, information security for Internet, Intranet and Extranet applications will be supported through the incorporation of an advanced security feature set.
IP directed broadcast DOS Attacks Security through the implementation of OmniVista Quarantine Manager (OV2770-QM) With OneTouch Security automation Automatic log-out Alcatel-Lucent OmniSwitch 6850 Series Minimum number of learned MAC addresses allowed per port: 1 Maximum number of learned MAC addresses allowed per port: 100 Maximum number of configurable MAC address ranges per LPS port: 1 Max number of learned MAC addresses per OS6850 switch (applies to all ports on the switch): 8K An IP directed broad
Authenticated VLANs A-VLANs IEEE 802.1X Note: there is no switch based local database for IEEE 802.1x authentication. Here are the limits: Maximum number of supplicants / non-supplicant users per system: 1024 Maximum number of non-supplicant users per port: 1024 Maximum number of supplicant users per port: 253 Maximum combined number of supplicant and non-supplicant users per port: 1024 The system supports up to 1024 authenticated/mobile mac-addresses. The system can roughly processes ~200 mac per seconds.
802.1X enhancements on the OmniSwitch 6850 (Synonymous with the feature titled “Alcatel Access Guardian support”) Note: The Alcatel Access Guardian is supported in Release 6.1.2r02 and in 6.1.2r03. Alcatel Access Guardian support Note: The Alcatel Access Guardian is supported in Release 6.1.2r02 and in 6.1.2r03.
Access Control Lists (ACLs) Performance: Wire-speed ACLs are sometimes referred to as filtering lists. Alcatel-Lucent OmniSwitch 6850 Series Access Control Lists are Quality of Service policies used to control whether or not packets are allowed or denied at the switch or router interface. ACLs are distinguished by the kind of traffic they filter. In a QoS policy rule, the type of traffic is specified in the policy condition. The policy action determines whether the traffic is allowed or denied.
Access Control List Manager (ACLMAN) Access Control List Manager (ACLMAN) is a function of the Quality of Service (QoS) application that provides an interactive shell for using common industry syntax to create ACLs. Commands entered using the ACLMAN shell are interpreted and converted to Alcatel CLI syntax that is used for creating QoS filtering policies.
Rule Precedence Default VLAN Secondary VLANs Automatic VLAN Containment (AVC) Alcatel-Lucent OmniSwitch 6850 Series Ethernet, 802.1q tagged ports and/or a link aggregate of ports. Initially all switch ports are non-mobile and are assigned to VLAN 1. When additional VLANs are created on the switch, ports are assigned to the VLANs so that traffic from devices connected to these ports is bridged within the VLAN domain. Switch ports are either statically or dynamically assigned to VLANs.
IP Virtual Router Port MAC Router Mode Single MAC Router Mode ONLY IEEE 802.1Q Basic IP Routing Routing Protocols Alcatel-Lucent OmniSwitch 6850 Series A VLAN is available for routing traffic when a virtual router port is defined for that VLAN and at least one active port has joined the VLAN. If a VLAN does not have a router defined, its ports are in essence fire walled from other VLANs. Each VLAN supports one IP virtual router port and a maximum of 1024 IP router port VLANs are allowed per switch.
The Virtual Router Redundancy Protocol (VRRP) IGMP Alcatel-Lucent OmniSwitch 6850 Series • Static routing • RIP v1 & v2 • OSPF v2 • BGP v4 Multicast • IGMP v1, v2 & v3 snooping • PIM-SM • PIM-DM (Future Release) • DVMRP Network Protocol • TCP/IP stack • ARP • DHCP relay 4.1.
the same VLAN. However, SSM forwarding between different VLANs (routing) is supported. In addition, the current implementation of IGMPv3 and SSM only forwards packets to a list of included sources for a given multicast destination. Exclude list forwarding is not supported, as it is not a requirement for SSM, and specifically Protocol Independent Multicast–Source Specific Multicast (PIM-SSM).
Port Monitoring Ethernet (100 Mbps), Gigabit Ethernet (1000 Mbps), and 10 Gigabit Ethernet (10000 Mbps) ports. One (1) port mirroring session is supported in a standalone switch. OmniSwitch 6850 Family switches support “N-to-1” port mirroring where up to 24 source ports can be mirrored to a single destination port. By default, port-mirroring sessions are bi-directional.
SSHv2 4.1.2 SSHv2 for secure CLI session with PKI is also supported Alcatel-Lucent OmniSwitch 6850 Series The OmniSwitch Secure Shell feature provides a secure mechanism that allows you to log in to a remote switch, to execute commands on a remote device, and to move files from one device to another. Secure Shell provides secure, encrypted communications even when your transmission is between two untrusted hosts or over an un-secure network.
OmniSwitch 6850 Series – IETF / IEEE Standards The OmniSwitch 6850 Series is fully compliant with the relevant industry standards to include the following: For further references on these Standards, refer to: www.IEEE.com For further references on these Standards, refer to: www.IETF.org IEEE 802.1D-1998 IEEE 802.1p IEEE 802.1Q IEEE 802.1s IEEE 802.1x Extended 802.1x IEEE 802.1x MIB – Port Access IEEE 802.1v IEEE 802.1w IEEE 802.3 IEEE 802.3i IEEE 802.3ab IEEE 802.3ac IEEE 802.3ad IEEE 802.3ae IEEE 802.
VLANs In a flat-bridged network, a broadcast domain is confined to a single LAN segment or even a specific physical location, such as a department or building floor. In a switch-based network, such as one comprised of Alcatel-Lucent switching systems, a broadcast domain—or VLAN— can span multiple physical switches and can include ports from a variety of media types.
Supported Protocols and Services Supported TCP Service Parameters Bgp (179) Gopher (70) Chargen (19) Hostname (101) Cmd (rcmd, 514) Ident (113) Daytime (13) Irc (194) Discard (9) Klogin (543) Domain (53) Kshell (544) Echo (7) Login (rlogin, 513) Exec (rsh, 512) Lpd (515) Finger (79) Nntp (119) Ftp (21) Pim-auto-rp(496) Ftp-data (20) Pop2 (109) Supported UDP Service Parameters Biff (512) Bootpc (BOOTP) client (68) Bootps (BOOTP) server (67) Discard (9) Dnsix (195) Domain (DNS, 53) Echo (7) Isakmp (500) Mobi