User Manual

43 44
6.1.2 Wi-Fi
Using Wi-Fi, you can connect to the Internet when your tablet is within
range of a wireless network. Wi-Fi can be used on your tablet even without
a SIM card inserted.
To turn Wi-Fi on and connect to a wireless network
•Touch on the Settings shortcut panel to get to Settings.
•Touch the switch beside Wi-Fi to turn on/off Wi-Fi.
•Touch Wi-Fi, the detailed information of detected Wi-Fi networks is
displayed in the Wi-Fi networks section.
•Touch a Wi-Fi network to connect. If the network you selected is
secured, you are required to enter a password or other credentials (you
may contact your network operator for details). When finished, touch
Connect.
6
Getting connected ................
To connect to the internet with this tablet, you can use GPRS/EDGE/
UMTS/HSPA/HSPA+ networks or Wi-Fi, whichever is most convenient.
6.1 Connecting to the Internet
6.1.1 GPRS/EDGE/UMTS/HSPA/HSPA+
The first time you turn on your tablet with SIM card inserted, it will
automatically configure network service: GPRS, EDGE, UMTS, HSPA,
or HSPA+. If the network is not connected, you can touch in the
Settings shortcut panel.
To check the network connection you are using, then touch Settings\
More...\Mobile networks\Access Point Names or Network
operators.
To create a new access point
A new GPRS/EDGE/UMTS/HSPA/HSPA+ network connection can be
added to your tablet with the following steps:
•Drag down the Settings shortcut panel and touch to access
Settings.
•Touch More...\Mobile networks\Access Point Names
•Touch Menu key and select New APN.
•Enter the required APN information.
•When finished, touch the Menu key and select Save.