Instruction Manual

17 18

Getting started1.2

Set-up1.2.1

Removing or installing the back cover

Inserting or removing the SIM card

You must insert your SIM card to make phone calls. Please power off your

phone before inserting or removing the SIM card.

Place the SIM card with the chip facing downwards and slide it into its

housing. Make sure that it is correctly inserted. To remove the card, press

and slide it out.

For dual SIM models, both SIM1 and SIM2 can support 2G and 3G

networks, but when 3G SIM cards are inserted into both SIM1 and SIM2

slot at the same time, only SIM1 will support 3G network

(1)

5036D only.

Your phone only support mini-SIM card. Do not attempt to insert

other SIM type like micro and nano card, otherwise may cause

phone damage.

Installing or removing the battery

Please power off your phone before removing the battery.

Insert and click the battery into place, then close the cover.•

Unclip the cover, then remove the battery.•

Installing the microSD card

To install, please insert the external microSD card into the slot with the

gold contact facing down. To remove the external microSD card, gently

press and slide it out.

5036

5036D