User manual

Installing and removing the microSD card

Before inserting/removing the MicroSD card, you should ensure the phone

is off, to protect it from corruption or damage.

• Insert the external microSD card into the slot with the gold contact

facing down.

• To remove the external microSD card, gently press and slide it out.

To avoid data loss and SD card damage, before removing the SD

card, please ensure that the SD card is unmounted (Settings\

Storage\Unmount SD card).

Charging the battery

Connecting the battery charger to your phone and main socket respectively,

the LED indicator will light while charging.

• Make sure the battery is correctly inserted before connecting the

charger.

• When using your telephone for the first time, charge the battery fully

(approximately 3 hours).

You are advised to fully charge the battery ( ). Charging status is

indicated by the percentage on screen while the phone is powered off. The

percentage increases as the phone is charged. If the battery is exhaustion,

there will be no indication until enough power charged.

To reduce power consumption and energy waste when the

battery is fully charged, disconnect your charger from the plug;

switch off Wi-Fi, GPS, Bluetooth or background-running

applications when not in use; reduce the backlight time, etc.

1�2�2 Power On Your Phone

Hold down the Power key until the phone powers on, unlock your phone

(Slide, PIN, Password, Pattern or Face unlock) if necessary and confirm. The

Home screen will then be displayed.

If you do not know your PIN code or if you have forgotten it, contact your

network operator. Do not leave your PIN code with your phone.

Set up your phone for the first time

The first time you power on the phone, you can see a welcome page, touch

Next, several pages of quick guide will follow up.

Then you should set the following options:

• Touch Get start��, then select the phone›s language.

• Touch Next, select one of available Wi-Fi networks or add another one.

Touch Skip if you do not want to connect to a Wi-Fi network.

• Set your date and timezone, you can also choose Automatic or Automatic

timezone to use network provided time and timezone, then touch Next.

• Select font size for your phone, then touch Next.

• Mark the checkbox to enable related back up & restore model, and set up

backup account, then touch Next.

• Select location access mode, then touch Next.