Operation Manual

DSL service
Ethernet port
1 Speed Touch Installation Guide
17 / 104
3EC 17058 AAAA TCZZA Ed. 04
1.2.1 What you Need
Depending on the STHome variant you purchased, the following
DSL service must be available at your local premisses:
 ADSL/POTS
ADSL service must be enabled on your POTS telephone line.
 ADSL/ISDN
ADSL service must be enabled on your ISDN telephone line.
As both telephone and ADSL service are simultaneously available
from the same copper pair, you need a central splitter or
distributed filters for decoupling ADSL and telephone signals.
Contact your SP for more information.
To use the Ethernet port you need at least:
 One PC with an Ethernet 10BaseT PCNetwork Interface
Card (NIC) installed
 For local networking, a 10BaseT hub and the necessary
connection cables.
To use the (optional) ATMF25.6 port you need:
 A PC with an ATMF25.6 PCNIC installed
 For ATM networking, a workgroup ATM switch.