Operation Manual
Tables
Restrictions for adding
phonebook entries
Adding phoneboo
k
entries
Deleting phoneboo
k
entries
5 Networking - ATM
53 / 104
3EC 17058 AAAA TCZZA Ed. 04
The 'Phonebook' table indicates all currently configured
phonebook entries and allows to add or delete entries.
The 'AutoPVC' table lists all PVCs communicated via AutoPVC. If
AutoPVC is not supported at the remote side, i.e. the Digital
Subscriber Line Access Multiplexer (DSLAM), the 'AutoPVC' table
stays empty.
Although you are free to give any name to a phonebook entry, a
few restrictions apply:
You may not provide an entry with a name which already is
supplied in the 'Phonebook' table.
Phonebook entries, which are intended to be used for the
PPPoAtoPPTP Relaying packet service may not start with a
capital 'P', or a capital 'T'.
Each entry in the STHome phonebook must have a unique VC,
i.e. a unique VPI/VCI combination. Adding a phonebook entry
with a VPI/VCI, which is already used in the 'Phonebook' table,
will result in an error message.
Proceed as follows:
1. Browse to the 'Phonebook' page.
2. Enter a name of your choice to identify the new phonebook
entry in the 'Name' field.
3. Enter the VC's VPI and VCI values in the 'VPI' and 'VPI' fields.
Note: In most cases these values are provided by your SP.
4. Select the Packet Service of your choice, or choose any from
the 'Type' popdown list.
5. Click
and to finish the procedure.
On the 'Phonebook' page, click next to the phonebook
entry you want to delete. As a result your selection is deleted. Click
.