Operation Manual

Overview of the
ToDefaults methods
In this section
9 Maintenance - Speed Touch ToDefaults
76 / 104
3EC 17058 AAAA TCZZA Ed. 04
9.2 Speed Touch Reset
To restore STHome's original settings, three methods are
provided:
 Two local software methods:
 BrowsetoDefaults
Which sets all parameters to original defaults, but keeps
the system password and IP address.
 PingtoDefaults
Which sets all parameters to original defaults, including
the system password and IP address.
 One hardware method: SwitchtoDefaults.
Restoring Original Settings
Be careful when using the BrowsetoDefaults, PingtoDefaults,
or the SwitchtoDefaults procedures as these destroy changes you
previously made to the STHome internal settings.
A reset to defaults via a PingtoDefaults, or via a
SwitchtoDefaults, also implies the STHome's IP address is reset
to 10.0.0.138.
Topic See
BrowsetoDefaults 9.2.1
PingtoDefaults 9.2.2
SwitchtoDefaults 9.2.3
CAUTION