User`s guide

Turn on your STHome
POST phases
Ethernet port LED
1 Speed Touch Installation Guide
20 / 104
3EC 17058 AAAA TCZZA Ed. 04
1.2.3 STHome Power On/Off Behaviour
Once all previous steps are completed, you can turn the STHome
on (
I) or off (O) with the power switch.
As soon your STHome is turned on, you can check the
PWR/Alarm" LED to see how the Power On Self Test (POST)
progresses.
Phase PWR/Alarm" LED Indication Description
1 Flashing red POST pending
2 Solid amber Startup failed
Solid red POST failed
Solid green Normal operation
The Ethernet port on the back panel has a LED:
Link Integrity LED
10Base T/MDI-X
Indicator
Description
Name Color State
Integrity Green Off No connection on this port.
gy
On Ethernet link up.
If the STHome and other LAN device(s) are properly connected
and powered on, the particular green LED lights up.