User`s guide
'Upgrade' page
components
Upgrade Preconditions
Software upgrade via
your LAN
7 Maintenance - Speed Touch Software
68 / 104
3EC 17058 AAAA TCZZA Ed. 04
The following fields are shown:
ξ 'Active software version'
Indicates the software version the STHome is currently using.
ξ 'Passive software version'
Indicates the software version resident in the STHome, but
not used. This could be a newer version which is yet to be
switched to active, but also a dormant older version.
ξ Software path field
Allows you to specify the path to the STHome upgrade
software package to be uploaded.
Clicking
allows you to browse to the location
of the upgrade software.
A valid STHome software package must reside either on a local
drive, on a floppy disk or a CDξrom.
For new software upgrade packages, please contact your SP or
check the Alcatel web sites at:
http://www.alcatel.com
http://www.alcateldsl.com
Proceed as follows:
1. Browse to the 'Upgrade' page.
2. In the 'Active software version' field the software package that
is running is labeled.
Check whether the 'Passive software version' field is empty. If
not, click
.
3. Click
next to the 'Software path' input field to
locate the upgrade software package
Note: If the path is known you can immediately enter it in the Software
path' input field and skip step in this procedure.