User`s guide

7. BASE SETTINGS
7.1 REGISTERING HANDSETS
You can have up to 5 handsets associated with (“registered on”) the base of your Versatis C350. If you already
have 5 handsets registered and want to replace one, you need to uninstall it first (see next Section) before
registering a new handset.
The handset(s) delivered with your Versatis C350 will already be registered on the base. If, however, a
handset isn’t getting the dial tone, and the display shows UNSUBSCRIBED, follow the registration procedure.
On the base:
 Press .
4
The red LED ( ) on the base flashes. Your Versatis C350 is now ready to link up with a new
handset. This operation must be carried out within 90 seconds of pressing the key.
On the handset:
 Press to open the menu.
 Select ADVANCE SET using the navigation keys and press to confirm.
 Select REGISTRATION using the navigation keys and press to confirm.
 Enter the PIN code (0000 by default) and press to confirm.
When a handset is registered on a base, it is automatically assigned a number (from 1 to 5), which appears
on the right of the screen. This is the number to be used for intercom calls.
NB: To cancel the handset registration, remove the batteries.
17
Versatis_C350_En:Versatis 20/07/2010 13:06 Page 17