User`s guide

1.1.3 Connecting the Versatis C350 Duo/Trio charger(s)

 Plug each power supply cable into the connector underneath the charger.

 Connect each mains adapter to a 230V/50Hz power supply.

1.2 INSTALLING THE HANDSET

Fitting the batteries and charging up for the first time

Open the battery compartment at the back of the handset by sliding the

cover. Insert the batteries: follow the signs (+/-) telling you which way

round they go.

 Place the handset on the base. The red base light ( ) comes on.

The battery charge icon on the telephone becomes active.

Before using for the first time, we recommend that you leave the telephone to charge up on the base for

24 hours in order to optimize battery life and performance.

Check that the handset is registered on the base (icon steady) and take the line .

The dial tone confirms that your Versatis C350 is working (if not, see Chapter 10).

Only use rechargeable batteries with exactly the same

specifications as those supplied with the product.

Using non-rechargeable or non-conforming batteries can

damage the product and could pose a health hazard (see

Chapter 9 “Technical Specifications”).

Batteries can split or leak if incorrectly inserted, opened or

exposed to heat.

Never dispose of batteries in a fire: they could explode.

For better listening quality, remove the protective film around the handset display(s) and

earpiece(s).

Versatis_C350_En:Versatis 20/07/2010 13:05 Page 4