User Manual One Touch X600 1
Safety Precautions Read the safety precautions carefully to ensure the correct and safe use of your wireless device. Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft.
Content Safety Precautions .................................................................................................. 2 1. Overview .............................................................................................................. 4 2. Web UI configuration .......................................................................................... 4 2.1 login the configuration page ............................................................................ 4 2.2 Main page.................
1. Overview Welcome to choose our mobile broadband device. This device allows you to connect to internet from anywhere, anytime. To use this device you need a device with web browser. 2. Web UI configuration 2.1 login the configuration page Open the browser, and then input the address http://192.168.1.1. The login page displayed 2.2 Main page After login successfully, the main page displayed The Main page include Connection, SMS, Settings.
Active profile: Select the profile you want to use from the drop down box. Connection Status: display the network is connected or disconnected; Usage: Display usage data Duration: the duration for current connection; WAN status Network name: the network name you are using; Network type: GPRS/EDGE/UMTS/HSDPA/HSUPA/HSPA+ Roaming: display whether you are in roaming network or not; IP address: this is the IP address arranged for this device. 3.
1,Choose Manual in the network selection. 2,Click . 3,Click to list the available network. 4,Choose the network and Click
Read SMS Left click the content of the SMS to read. Sent SMS 1,Move the mouse to “SMS”. 2,Left click “New”. 3,Input the number and the content. 4,Click . Forward SMS 1,Left click the content of the SMS you want to forward. 2,Click . 3,Input the number. 4,Click . Reply SMS 1,Left click the content of the SMS you want to reply. 2,Click . 3,Input the content. 4,Click . Delete SMS 1,Left click the Mark of the SMS you want to delete. 2,Click .
1,Choose the language, ; 2, Click . 5.2 System Reboot Click to restart the device. Reset Reset the device to the original factory settings. you can also use the hardware reset button under the back cover, marked with Reset. 6 Warranty The device is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1.
6) Any servicing, modification or repair performed by individuals not authorised by the manufacturer, the vendor or the approved maintenance centre, 7) Use of this device for a purpose other than that for which it was designed, 8) Malfunctions caused by external causes (e.g., radio interference from other equipment, power voltage fluctuations), 9) Faulty connections resulting from unsatisfactory radio transmission or caused by the absence of radio relay coverage.
2. No SIM card; 3. SIM Error You may need: 5. 1. Check network signal; 2. Insert a SIM card; 3. Check SIM card status. Q: The SIM/USIM card does not register any networks A: The reasons are shown below: 1. Unstable local signal; 2. The software is an old version; 3. Hardware problem. You may: 1. Try to logon from another location; 2. Update the software; 3. Check the hardware or use another data card and retry. 6. Q: Why does the prompt “No available connection profile.
8. Certification This product meets applicable national SAR limits of 2.0W/kg. The specific maximum SAR values can be found in the following section of this user guide. www.sar-tick.com When carrying the product or using it while worn on your body, either use an approved accessory such as a holster or otherwise maintain a distance of 5mm from the body to ensure compliance with RF exposure requirements. Note that the product may be transmitting even if you are not making a phone call.
During use, the actual SAR values for this device are usually well below the values stated above. This is because, for purposes of system efficiency and to minimize interference on the network, the operating power of your mobile device is automatically decreased when full power is not needed for the call. The lower the power output of the device, the lower its SAR value. Body-worn SAR testing has been carried out at a separation distance of 5mm.