User Manual 1
Safety Precautions Read the safety precautions carefully to ensure the correct and safe use of your wireless device. Do not switch on your device when the device use is prohibited or when the device use may cause interference or danger. Follow the rules or regulations in hospitals and health care facilities. Switch off your device near medical apparatus. Switch off your device in an aircraft. The device may cause interference to control signals of the aircraft.
Content Safety Precautions .................................................................................................. 2 1. ICON .................................................................................................................... 4 2. Quick Setup ......................................................................................................... 4 3. Connection .......................................................................................................... 4 3.
1. ICON The icon description as bellow: Category Icon Display Signal Strength Connection Status SMS From no signal to excellent Disconnect disable, Connected enable, Battery Wi-Fi status SMS is full, Unread From lowest power to full power Wi-Fi is active 2. Quick Setup Admin Password: Login Password: Set the password for login. Wi-Fi settings: SSID: Set the network name of this device. Security: Configure the security mode for Wi-Fi connection.
Connection Status: current connection, WAN status, WLAN status; Profile management: manage account settings, which includes your preferred network connection as well as the Access Point Name (APN). Network: choose and set up preferred network settings. PIN management: manage PIN, enable/disable/change/verify; Connection Mode: Set the dial mode of this device, default is Auto. 3.1 Connection status Current status Active profile: Select the profile you want to use from the drop down box.
Delete a profile: 1, Select the profile from the connection profile list; 2, Click ; 3, On the pop up dialog ”are you sure to delete this profile?”, click ; Note: the default profile can not be deleted. Set as default: 1, Select the profile from the connection profile list; 2, Click ; 3, On the pop up dialog ”are you sure to set this profile as default?”, click . Note: Once set the profile as default,(D) will be added as a mark. 3.
3.5 Connection Mode Manual: The device dials to connect to Internet by clicking "Connect" button in the connection page. Auto: The device dials automatically to connect to Internet when user turn it on. Default is Auto. 4. SMS You can move the mouse to "SMS" and click the items you want. In this section, the following items are included: New: write the new SMS; Read: list the SMS received; Sent: list the SMS sent successfully. Draft: save the SMS not sent or sent failed.
Delete all SMS 1,Click ; 2, Click ; SMS settings SMS Center Number: You can get it from your operator; SMS Save Mode: the location SMS stored, default is SIM card; 5. Settings You can move the mouse to "Settings" and click the items you want.
support (provided by PC vendor) and select the PBC. 3, Login web page(192.168.1.1),settings->WPS; 4, Enable PBC and click " "; Note: If the WPS function start correctly, the info will display in the page as bellow: "Succeeded!", Else displayed "Failed!" to indicate the problem happened during the WPS setup.
2, Click . The default language is English. 5.5 System Reboot Click to restart the device. Reset Reset the device to the original factory settings. you can also use the hardware reset button under the back cover, marked with R. Save the configuration 1,Click ; 2,Select the location to save current settings. Restore the configuration 1,Click ; 2,Select a file saved previously to restore the settings. 6.
The device is warranted against any deviation from technical specifications for a period of twelve (12) months from the date specified on your original invoice1. Under the terms of this warranty, you must immediately inform your vendor in case of a conformity defect on this device, and present a proof of purchase. The vendor or repair center will decide whether to replace or repair this device, as appropriate.
This device is also warranted against hidden defects (defects inherent in the design, manufacture, etc.). There are no other express warranties than this printed limited warranty, expressed or implied, of any nature whatsoever. In no event shall the manufacturer be liable for incidental or consequential damages of any nature whatsoever, including but not limited to trading loss, commercial loss, to the full extent those damages can be disclaimed by law.
to see if it is expecting a WPS action from your PC. 5. Q: How to do if No service displayed on the screen? A: the possible reason are listed as bellow: <1. Unstable local signal. <2. Hardware problem. You may: <1. If you are inside a building or near a structure that may be blocking the signal, change the position or location of the device. For example, try moving the device close to a window. <2. Check the hardware or use another device and retry. <3.
<2,The SIM card is de-activated. You may: <1,Pull out and re-insert the SIM card. Be careful not to touch the contact points when handling the SIM card. <2,Contact your operator for advice 9. Q: How to do if “PIN lock” or “PUK lock” displayed on Screen? A: The SIM card is locked. Login Web page and Enter your PIN code or PUK code you got from the operator. Note: if you entered wrong PIN 3 times, then PUK is needed, and if the wrong PUK entered 10 times, the SIM card will be locked forever. 10.
16. Q: How to search the network manually? A: Login web browser, Go to Connection->Network, choose manual for network selection, click ,then click . 17. Q: How to check the model number and firmware versions of my device? A: Login web browser, go to Settings->System->Device information 18. Q: Can I backup and restore my configuration settings? A: Login web browser, go to Settings->System, click "Backup" to backup and "Restore" to restore. 19.
Hospital Pay attention to the following points in hospitals or health care facilities: Do not take your wireless device into the operating room, intensive care unit, or coronary care unit. Do not use your wireless device at places for medical treatment where wireless device use is prohibited. Storage Environment Do not place magnetic storage media such as magnetic cards and floppy disks near the wireless device. Radiation from the wireless device may erase the information stored on them.
When switched on, this device emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags. To ensure that there is no problem, do not place this device on top of the dashboard or within an airbag deployment area. Check with your car dealer or the car manufacturer to make sure that the dashboard is adequately shielded from this device RF energy. Conditions of Use: Switch this device off before boarding an aircraft.
Collection Point: This symbol on this device means that these products must be taken to collection points at the end of their life: Municipal waste disposal centers with specific bins for these items of equipment. Collection bins at points of sale. They will then be recycled, so that their components can be reused, and to prevent substances being disposed of in the environment. In European Union countries: These collection points are accessible free of charge.
