User's Manual

Switch On/Unlock
Switch on and unlock: When the device is in
the OFF mode, press and hold “POWER” key
to enter the startup screen, then the screen
is in locked mode. And press and pull the
icon to the unlocked position(the icon
appears), then the screen will unlock.
Power Save Mode/Lock Screen/Switch OFF
Press the “POWER” key shortly after starting up, the unit will enter power save and
locked mode.
Switch OFF: When the device is in Home menu, press and hold the “POWER” key for
about 2 seconds, and the screen will display the Power off interface, choose the "OK"
to confirm, the system will shut down.
Note: When the device has low battery, it will alarm continuously and shut down
automatically if the device is not being charged and the device cannot start up. Please
check if the battery is low, and try it again after the battery is charged.
Battery Management and Charging
Charge the battery for about 4 hours to make sure the battery is fully charged before
the first time of use.
Insert the micro port of the battery adapter into DC slot on the device, and connect the
other side with the power socket. The desktop icon of the battery will keep rolling, which
shows it is charging, please wait until the battery is fully charged, and do not disconnect
the power while charging. Once the battery is fully charged, the fully charged icon on the
desktop will apear. When the battery is exhausted completely, please charge at least one
minute before starting up.
Note: In order to keep the battery working in best condition, please pay attention to
the following:
• Please do not charge the battery in high temperatures.
• Do not wait for the batter to be fully depleted before charging again. Keep the battery
charged as needed.
• The included AC adaptor is for use with this unit only. Do not use it with other equipment.
To wall outlet
AC adaptor
EN - 3