User's Manual

EN - 3
Switch On/Unlock
Switch on and unlock: when the device is in the
OFF mode, press and hold “POWER” key to enter
the startup screen, then the screen is in locked
mode. And press and pull the icon to the
unlocked position(the icon appears), then the
screen will unlock.
Power Save Mode/Lock Screen/Switch OFF
Press the “POWER” key shortly after starting up, the unit will enter power save and
locked mode.
Switch OFF: When the device is in Home menu, press and hold the “POWER” key
for about 2 seconds, and the screen will display the Power off interface, choose the
Power off, and then select "OK" to confirm, the system will shut down.
Note: When the device has low battery, it will alarm continuously and shut down
automatically if the device is not being charged and the device cannot start up. Please
check if the battery is low, and try it again after the battery is charged.
Battery Management and Charging
Charge the battery for about 4 hours to make sure the battery is fully charged before
the first time of use.
Insert the micro port of the battery adapter into DC slot on the device, and connect
the other side with the power socket. The desktop icon of the battery will keep rolling,
which shows it is charging, please wait until the battery is fully charged, and do not
disconnect the power while charging. Once the battery is fully charged, the fully
charged icon on the desktop will appear. When the battery is exhausted completely,
please charge at least one minute before starting up.
Note: In order to keep the battery working in best condition, please pay attention to
the following:
• Please do not charge the battery in high temperatures.
• Do not wait for the battery to be fully depleted before charging again. Keep the
battery charged as needed.
• The included AC adaptor is for use with this unit only. Do not use it with other equipment.
To wall outlet
AC adaptor