User's Manual

EN-9
Bass Boost
Press BASS to turn on/off boosting the bass frequency.
Muting Audio
Press on the remote control to cut or restore the sound.
Using Preset Equalizer Curves
Press EQ on the unit to select among FLAT, ROCK, POP, JAZZ, CLASSICAL and CUSTOM. The display shows
your selection briefl y.
Creating a Custom Curve
1. Press EQ on the unit to select the CUSTOM mode.
2. While CUSTOM is displayed, press
/ to cycle among the displayed BASS and TREB range levels.
3. While BASS or TREB is displayed, adjust the volume to set the associated gain between -10 - +10.
4. Press EQ to exit.
SOUND FEATURES
BLUETOOTH
®
PAIRING
Before Bluetooth
®
pairing, you should turn on the Bluetooth
®
function of your other device (such as, mobile phone
with Bluetooth
®
function) and select RS2867B.
1. Press SOURCE repeatedly on the unit or press the on the remote control to select BT (Bluetooth
®
) mode.
2. The "BT" blinks at slow speed and it auto searches for the last paired Bluetooth
®
device in memory.
3. Once it enters the pairing status, the "BT" will blink at high speed.
4. Press PAIR on the player for 3 seconds to start pairing.
• If the Bluetooth
®
pairing is successful, the "BT" will not blink.
• If the Bluetooth
®
pairing is not fi xed, the "BT" will blink at slow speed. Please try pairing again.
Enjoy the music through Bluetooth
®
• Press to begin or pause playback.
• Press
/ to select a specifi c track.
• Press and hold
/ to start moving backward/forward at high speed.
Switch the unit to receive another Bluetooth
®
device
1. Disconnect your Bluetooth
®
device (such as mobile phone) from the player.
2. Press and hold the PAIR button on the player until the "BT" blinks at high speed.
3. Turn on the Bluetooth
®
function of your other device (such as, mobile phone with Bluetooth
®
function) and select
RS2867B for Bluetooth
®
pairing.
Note: If your Bluetooth
®
device (such as, mobile phone) needs the password while pairing, please enter 4-digit
number: 0000.