User's Manual

3
EN
USING THE REMOTE CONTROL
• PointtheremotecontrolattheREMOTESENSOR
located on the unit (see Front Panel illustration for
precise location).
• Whenthereisastrongambientlightsource,the
performance of the infrared REMOTE SENSOR
may be degraded, causing unreliable operation.
• Therecommendedeffective distance for remote
operation is about 16 feet (5 meters).
TO CHANGE REMOTE BATTERIES
1. Open the battery door.
2. InserttwoAAAbatteries.
BATTERY REPLACEMENT
When the batteries become weak, the operating
distance of the remote control is greatly reduced and
you will need to replace them.
Notes:
• Iftheremotecontrolisnotgoingtobeusedfora
long time, remove the batteries to avoid corrosion
damage caused by battery leakage.
• Do not mix old and new batteries. Do not
mix ALKALINE, standard (CARBON-ZINC) or
rechargeable(NICKEL-CADMIUM)batteries.
• Alwaysremovebatteriesassoonastheybecome
weak.
• Weakbatteriescanleakandseverelydamagethe
remote control.
• WARNING:Donotdisposeofbatteriesinare.
batteriesmayexplodeorleak.
CAUTION:
Dangerofexplosionifbatteryisincorrectlyreplaced.
Replace only with the same or equivalent type.
LOCATION OF CONTROLS
1. MUTEbutton
2. BLUETOOTH
button
3. VOL
/ button
/ / button
4. AUXbutton
5. BASS
/ button
6.
button
7. LINEINbutton
8. OPTICALbutton
9. TREBLE
/ button
10 SOURCE
/ button
REMOTE CONTROL
REMOTE CONTROL
1. Standby/ONbutton
2. SOURCE
button
3. BLUETOOTH
/LEVELindicator
4. AUXIN/LEVELindicator
5. OPTICALIN/LEVELindicator
6. LINEIN/LEVELindicator
7.
/ VOLUMEbutton
8. DC IN jack
9. AUXINR/Ljack
10. LINEIN3.5mmjack
11. OPTICALINjack
12. RemoteSensor
SOUNDBASE