Quick Reference Guide

SCRAM CAM

for Bracelet

b. Remove the Direct Connect device.

5. Access the client’s Reports/Communication page to verify that all

data was retrieved from the bracelet.

SUPERVISION MODIFICATION

ADD HOUSE ARREST TO EXISTING CAM CLIENT

1. In SCRAM

NET, navigate to the client who is having house arrest

activated.

2. On the client’s General page, click the Monitoring sub-tab.

The Client Monitoring page appears.

3. Select the ‘CAM + House Arrest’ option in the Monitoring Types

drop-down list.

4. The options in the CAM + House Arrest Settings section defaults

to the Agency-level settings. Make any changes to the parameters

that will be unique to the client.

5. If you wish to establish an expedited communication standard,

select the left button in the Optional Services section.

6. The Priority Notiﬁ cation Settings section will only appear when

priority notiﬁ cation is selected. Like the House Arrest settings, the

Priority Notiﬁ cation settings default to the Agency-level settings.

Make any necessary changes.

7. Click the Complete Change Monitoring button.

House arrest monitoring will begin the next time that the bracelet

and base station communicate.

8. Select a base station, setting the status to Pending Assignment.

9. Ensure that the base station is fully charged.

WIRED OR WIRELESS SCRAM BASE STATION NOT ASSIGNED

If a wired or wireless SCRAM Base station was not previously assigned,

instruct the client to come into the ofﬁ ce and perform the following

steps.

1. Determine the communication method.

Cellular/WI-FI

The wireless SCRAM Base Station allows data to be quickly

uploaded to SCRAM

NET using either cellular or WI-FI services.

Internet Service

To use the ethernet port on the base station, using the proper

tool such as needle-nose pliers, carefully remove the clear, plastic

plug from the Ethernet port. Damage may occur if the plug is

improperly removed. If the client has an Internet modem or

router installed, use an Ethernet cable to connect the base station

to an available network port to send data back to SCRAM

NET