AlcoLimit® RBT Mini ® The world’s most intelligent breathalyser! User Manual AlcoLimit Breathalysers Pty. Ltd. P.O. Box 1106, MANLY, NSW, 1655 Ph: 1300 667 661 www.alcolimit.com.au Version 1.
AlcoLimit® RBT Mini® IMPORTANT INFORMATION If you do not follow the instructions for use your test results may be inaccurate and your warranty may become void. For the most accurate results, it’s important to wait at least 20 minutes after smoking, eating or drinking before testing. This is a universal principle for all breathalysers, not just yours. The reason being is that if you have recently consumed alcohol, the residual alcohol in your mouth is very high and can cause a false reading.
AlcoLimit® RBT Mini® SPECIFICATIONS Recommended Usage Personal Sensor Type Advanced Electrochemical Fuel Cell Accuracy +/- 0.005%BAC at 0.050%BAC Range %BAC 0.000 - 0.400 Display Stand alone or via mobile device Warm-up time Breath Sampling Time < 10 seconds, may vary depending upon the previous %BAC measured. 5 seconds Housing Shock Resistant Plastic Weight 43 grams Power Source 1 x AAA alkaline battery Dimensions 41.5 mm x 68 mm x 16.
AlcoLimit® RBT Mini® INITIAL SET-UP Install the Batteries: Slide the cover on the rear of the unit upwards. Install 1 x AAA ALKALINE battery checking the polarity is correct. DO NOT USE carbon or any other non-alkaline batteries. Replace the battery cover by inserting the lugs into the holes and sliding the cover downwards. Install the App. This process must be completed once for every mobile device you wish to use/ pair your breathalyser with. STEP 1.
AlcoLimit® RBT Mini® STEP 7. Press the Cog/Settings symbol in the bottom right. Select your “Limit Line.” In ‘Stand alone’ mode this is the level at which the red light will illuminate to show you are over your designated level. Below this level the green light will illuminate. TURN ON Sound and TURN ON Camera, if you would like the app to take your photo while testing. PERFORMING A BREATH ALCOHOL TEST STEP 1. Ensure you have waited 20 minutes since your last alcoholic drink.
AlcoLimit® RBT Mini® STEP 6. After the result has appeared for 15 seconds the app enables you to make a memo which is viewable with test results from the Graph icon and the test results can be shared via Text message, Facebook, or Twitter. STEP 7. Tap either “Retest“ or “BAC level“ on the app (or press Power button on the AlcoLimit RBT Mini breathalyser to test again without selecting a user). If you want to start test again from the beginning, tap the Home Icon in the bottom menu. STEP 8.
AlcoLimit® RBT Mini® NOTE: If the device doesn‘t have the set value of “Limit line“, all Blue, Red and Green LEDs will flicker together after the warm-up process. Pair the device with the app and set “Limit Line“ on the setting menu of the app. If you turn on the app on your smartphone while using the device in the Standalone Mode, the device will move into the App Mode and start pairing automatically.
AlcoLimit® RBT Mini® TROUBLESHOOTING GUIDE Problem Solution My AlcoLimit RBT Mini Breathalyser The AlcoLimit RBT Mini Breathalyser requires the following specifications to connect and operate correctly: - Bluetooth 4.0 (for connectivity) won’t connect with my mobile device Plus one of the following or a later version: - iPhone 4S or later running iOS 7 and above - Android devices running OS 4.3 and above Check these specifications are available on your device.
AlcoLimit® RBT Mini® WARNINGS (Please read carefully) • • • • • • • • • • • • Closed rooms with poor ventilation, pollution, smoke or air conditioning may delay the time for resetting between tests. Avoid testing in the presence of any substances that contain methyl alcohol, isopropyl alcohol or acetone. These substances may interfere with the results of the test.
AlcoLimit® RBT Mini® RECALIBRATION The calibration period of AlcoLimit RBT-mini Breathalyser is 6 months for workplace use and 12 months for personal use, or 500 uses, whichever comes first. A specially calibrated alcohol simulator is used to recalibrate the AlcoLimit RBT-mini Breathalyser and the electronics need to be reset during recalibration, do not attempt to service it yourself. If you receive erratic or high readings your breathalyser may need recalibration.
AlcoLimit® RBT Mini® You may pay with credit card online via PAYPAL on our ‘SERVICING’ page at: www.alcolimit.com.au/servicing Or you may call us on 1300 667 661 to pay with credit card. Your unit will usually be returned to you within a week. If you have any questions regarding recalibration, please call us on 1300 667 661. For NZ Customers we recommend payment via Credit Card due to exchange rate changes.
AlcoLimit® RBT Mini® Disclaimer cont’d The manufacturer assumes no responsibility in circumstances where a person who has used the device and received an indication of the presence of alcohol in his/her exhaled breath is later found to be under the influence of or their judgment has been impaired by alcohol; and will under no circumstances be liable for any loss or damage in contract or tort (including negligence) or otherwise suffered by any person arising directly or indirectly from the use of AlcoLimit R
RECALIBRATION SERVICE RECORD Date of Recalibration Service Details Technician For service records to be updated, please send your instructions with your breathalyser each time it is recalibrated. Alternatively, you may request a Calibration Certificate at a cost of $22 (recommended for workplaces).
