Instruction manual

47
handset registered to the base, you can set one cordless handset to ring 2, 4
or 6 times before the other handsets will ring.
1. Press « Menu », scroll
to « Settings » and press « Select ».
2. Scroll
to « Set Base ». Press « Select ».
3. Scroll
to « Ring priority ». Press « Select ».
4. Scroll
to « Select Handset ». Press « Select ». The other handsets
registered to the base are displayed, e.g. Handset 1. Press
or to
select the handset that you would like to ring first and press « Select ».
5. Press
or to highlight to 2, 4 or 6 Rings and press « Select ».
6. Press
to return to standby.
Note: To change back to the original setting of the telephone base and
cordless handset ringing at the same time. Select « All handsets » at Step 4.
13. Recall mode
The default recall time is suitable for your country and network operator and is
set at 600 ms (Recall 2).
1. Press « Menu », scroll
to « Settings » and press « Select ».
2. Scroll
to « Set Base ». Press « Select ».
3. Scroll
to « Recall Mode ». Press « Select ».
4. Press
or to highlight « Recall 1 » (100ms) or « Recall 2 » (600ms).
Press « Select » to confirm.
5. Press
to return to standby.
14. System PIN
The System PIN is used when changing certain settings and for handset/base
registration/de-registration. The default setting is 0000 but you can change
this to your own personal PIN number with up to 8 digits.
When you enter a PIN the digits are displayed as « **** ».
1. Press « Menu », scroll
to « Settings » and press « Select ».
2. Scroll
to « Set Base ». Press « Select ».
3. Scroll
to « System PIN ». Press « Select ».
4. Enter the old PIN (original setting 0000) and press « OK ».
5. Enter the new PIN and press « OK ». Re-enter the new PIN and press « OK ».
6. Press
to return to standby.