Instruction manual

49
manufacturer’s handset, the instructions may vary. In this case, please
refer to the manufacturer of the additional handset.
. The Master PIN is required before you can register or de-register handsets.
The default PIN is 0000.
1. To register a handset
At the telephone base:
1. Press and hold the intercom button for at least 3 seconds until you hear
a double beep. You have 60 seconds in which to register your additional
handset.
At the handset:
2. Press « Menu », scroll
or to « Registration » and press « Select ».
3. « Register Handset » is highlighted, press « Select ».
4. Bases are displayed. If necessary scroll
or to a new base you wish
to register your handset to and press « Select ».
5. Enter the System PIN (original PIN is 0000) and press « OK ».
6. « Searching Base X » (where X is the chosen base number) then
« Handset Registered » is displayed.
The handset is automatically assigned the next available handset number
e.g. 2.
2. To select a base
You can register your handset with up to 4 bases. Once registered, you can
switch between bases, for example, bases at home and at work.
1. Press « Menu », scroll
or to « Registration » and press « Select ».
2. Scroll
to « Select Base » and press « Select ».
3. All base numbers are displayed. « (In use) » is added to bases where the
handset has been previously registered. Scroll
or to the base you
want and press « Select ».
4. « Searching base... » is displayed, followed by the standby display for that
base.
3. To De-register a handset
1. Press « Menu », scroll or to « Registration » and press « Select ».