User guide

7
To answer a call
1. When the handset and base unit ring:
Press
2. When
you have finished the call, press
or place the handset back on the charge pod
briefly
, and display shows "LINE IN USE"
Making calls from the redial list
1.
2.
Press
to view the redial list
Scroll
or
until you see the name and/or number
of the person you want to call, then press
The number which you have selected will be automatically
dialed out and the display shows "LINE IN USE"
Making calls from CID list
1.
In idle mode, press or to enter the CID list, and then
scroll or until you see the name and/or number of
2. Press
, the number which you have selected will
automatically dialed out and the display
shows "LINE IN USE"
the person you want to call.
hear you, the display will show
Muting the mouthpiece
1. Press " " button to mute the mouthpiece
While the mouthpiece is muted the person on the other end of the call can not
"MUTE" and you can not dial any numbers.
2. Press " " button again to un-mute the mouthpiece, and the handset
shows "LINE IN USE"
You can store up to 150 numbers in each handset’s Phone Book (memory). Each
number can have up to 20 digits, and you can store a name of up to 12 characters
with the number. (If you try to store more, the handset will give a brief warning tone
and the extra letter/number will not be saved in memory.)
How to enter character
To use the characters you press on the button where you
see the character e.g. if you want to insert the letter
‘
A
’
you press
, if you want to insert the letter
‘
B
’
, press
twice and for "C"
, three times etc. If you want to insert
‘ AA’ then you
will have to wait for the first "A" to stop
flashing then insert the second
for space,
to delete single characters and press and hold
to delete the
whole text.
press
once
"A"
, press
6. Phone Book/(Memory dialing)
Also, you can select a different ringer melody for each entry,
abut this will only work if you subscribe to CID (see page 11).