Instruction manual

5. Recall mode

Depending on your country and network operator, your Studio has the recall

time set as 600 ms (RECALL 2). It is unlikely that you need to change this

setting unless advised to do so.

1. Press Menu/Ok, scroll Calls list/Down to « SETUP » and press Menu/Ok.

2. Scroll Calls list/Down to « RECALL » and press Menu/Ok.

3. Press Calls list/Up or Calls list/Down to select « RECALL 1 » (short flash

time) or « RECALL 2 » (long flash time) and press Menu/Ok to confirm.

6. Restore default settings

You can restore your Studio to its default (original) settings. All the handsets

that are registered to the base will be retained.

WARNING

Resetting your phone to its default settings will delete all entries in the

Phonebook and Calls list. All handset and base settings will also be reset.

1. Press Menu/Ok, scroll Calls list/Down to « SETUP » and press Menu/Ok.

2. Scroll Calls list/Down to « DEFAULT » and press Menu/Ok.

3. Enter the 4 digit PIN code (default = 0000) and press Menu/Ok. The

display shows « CONFIRM ? ».

4. Press Menu/Ok to confirm or Mute/Clear/Back to return to the previous

menu. Your Studio will restart automatically.

7. Emergency default

If you have lost your PIN code, you can still restore your Studio to its default

settings.

1. Remove the batteries from the handset.

2. Press and hold */Keylock while replacing the batteries. The display shows

« DEFAULT ».

3. Press Menu/Ok to confirm. Your Studio will restart automatically.

8. Eco mode

You can reduce the level of power emissions by operating your phone in Eco

mode. When the ECO mode is set to ON, the base transmission power will be

reduced. This feature is set to OFF by default.