Instruction manual

5
the product.
- Which power adapter?
The power adapter with a clear connecter is for the base unit and the power
adapter with a red colour connecter is for the charger unit (for multi-pack only).
- Connecting the base
1. Plug the telephone line cord into the socket marked on the underside
of the base.
2. Plug the power adapter with clear connecter into the socket marked
on
the underside of the base and plug the other end into the mains power wall
socket. Switch on the mains power.
- Installing and charging the handset
1. Remove the battery cover from the back of the handset and insert the
2 x AAA NiMH rechargeble batteries supplied. Please note the ‘+’ and ‘-’
markings inside the battery compartment and insert in the correct direction.
2. Slide the battery cover back into place.
3. If you are charging the batteries for the first time, place the handset on the
base to charge for at least 24 hours continuously.
4. When the handset is fully charged, icon will appear steadily on the
display. Plug the other end of the telephone line cord (make sure that one
end is already plugged into the base) into the telephone wall socket.
- Connecting the handset and charger (for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process
for all the handsets and chargers.
1. Plug the power adapter with red connecter into the socket marked
on
the underside of the charger and plug the other end into the mains power
wall socket.
2. Remove the battery cover from the back of the handset and insert the 2 x
AAA NiMH rechargeble batteries supplied. Please note the ‘+’ and ‘-’
markings inside the battery compartment and insert in the correct direction.
3. Slide the battery cover back into place.
4. If you are charging the batteries for the first time, place the handset on the
charger to charge for at least 24 hours continuously.
5. When the handset is fully charged, icon will appear steadily on the
display. The display will show the time and handset number (e.g. 2) to
indicate that it is registered to the base.