User's Manual Part 1

8065751025 1.9

Constellation

Vision System

Universal Precautions

Universal precautions shall be observed by all people who come in contact with the

instrument and/or accessories to help prevent their exposure to blood-borne pathogens

and/or other potentially infectious materials. In any circumstance, wherein the exact

status of blood or body fluids/tissues encountered are unknown, it shall be uniformly

considered potentially infectious and handled in accordance with OSHA guidelines.

EMC Statement

It is important to install and use the equipment in accordance with the instructions

in order to prevent harmful interference with other devices in the vicinity. If this

equipment causes harmful interference to other devices (determined by turning the

equipment off and on), the user is encouraged to try to correct the interference by one

or more of the following measures:

Reorient or relocate the other device(s).

• Increase the distance between the equipment.

• Connect this equipment into an outlet on a circuit different from that to which the

other device(s) is connected.

• Consult the manufacturer or your Alcon field service engineer for help.

Table 1-2 Guidance and Manufacturer's Declaration - Electromagnetic Emissions - The Constellation®

Vision System is intended for use in the electromagnetic environment speciﬁed below. The

customer or the user of the system should assure that it is used in such an environment.

Emissions Test Compliance Electromagnetic Environment-Guidance

RF emissions

CISPR 11

Group 1 The Constellation

Vision System uses RF energy only for its internal function.

Therefore, its RF emissions are very low and are not likely to cause any interference

in nearby electronic equipment.

RF emissions

CISPR 11

Class A Based on extensive ﬁeld experience the Constellation

Vision System is suitable

for use in all establishments other than domestic and those directly connected

to the public low voltage power supply network that supplies buildings used for

domestic purposes.

The EMC Statement provides guidance on steps to take in case of electromagnetic

interference.

Harmonic emissions

IEC 61000-3-2

Class A

Voltage ﬂuctuations/

Flicker emissions

IEC 61000-3-3

Complies