User's Manual Part 2

8065751025 2.45
Constellation
®
Vision System
Basic Setup: The Accessories Setup Panel
Figure 2-34 shows the Accessories Setup Panel. On the panel, pressing a button next
to an accessory will display a popup with specific selections for that accessory.
The following accessories selections are available:
Scissors Handpiece
Forceps Handpiece
VFC (Viscous Fluid Control)
AGF (Auto Gas Fill)
Diathermy
•
•
•
•
•
Figure 2-34 The Accessory Setup Panel
Scissors - Pressing the button next to Scissors shows the following scissors options:
Proportional
Multicut
Undefined - no scissors has been selected or scissors has been detected but is not
a known type.
When the system detects that the user has plugged in the Scissors handpiece, the
scissors type is automatically selected and the connected icon appears next to
the selection list. In addition, when the user selects an item from this list, the system
illuminates the LED on the scissors port on the front panel.
Forceps
- Pressing the Forceps button displays the forceps options that are available:
Normally Open
Normally Closed
When the system detects that the user has plugged in the Forceps handpiece, the
forceps type is automatically selected and the connected icon appears next
to the selection list. In addition, when the operator presses this drop list, the system
illuminates the LED on the forceps port on the front panel.
•
•
•
•
•