User's Manual Part 2

2.48 8065751025
Constellation
®
Vision System
Detailed Setup
The Detailed Setup screens are displayed by pressing the Setup button in the Menu
Bar or pressing the expand button on any of the six setup panels discussed
previously. Figure 2-37 shows the Fluidics Detailed Setup screen. On the left side
of the screen are seven selection controls that, when pressed, display the detailed
information related to that control.
The seven selections on the Detailed Setup screen are:
Fluidics
Probe
Handpiece
Accessories
Illuminators
Lasers
Priming Tray
Pressing a selection presents a graphical display of the step required to successfully
setup that selection. The Help button at the bottom of the setup screen allows the user
to access a video demonstration of the setup process (see Video Help at the end of the
Detailed Setup section).
Connection Help - Pressing a highlighted area on the Constellation
®
system shown
below the selection area displays a detailed view of the connections for each the
following areas on the front panel: electrical/pneumatic, cassette, illuminators, and
lasers.
Start Prime Button - The Start Prime button at the bottom of the screen enables the
user to initiate the priming process from this screen.
•
•
•
•
•
•
•