User's Manual Part 2

8065751025 2.49
Constellation
®
Vision System
Figure 2-37 The Detailed Fluidic Setup Panel
Detailed Setup: Fluidics
The Fluidics setup panel shown in Figure 2-37 displays the steps required to properly
setup the fluidics system after a cassette has been inserted. If a cassette has not been
inserted, this screen will direct the user to insert the cassette. Once inserted, the type
of cassette is displayed at the top of the panel.
Select Operating Mode - The options available here a dependent upon the type
of cassette inserted into the system. A Premium Combined cassette is inserted in
Figure 2-38 and therefore all options are available. If an anterior or posterior only
cassette is inserted, the user can only select the associated mode.
Select Infusion/Irrigation Source - A selection from the Power IV Pole, Gravity or
Pressurized options is made here by pressing the bottle associated with the source
to be used. The desired source is highlighted in yellow when selected.
Select Infusion Tubing - Allows the user to select between Auto and Manual
Stopcock tubing sets.
Select Infusion Cannula - Allows the user to select one of the following infusion
cannula: 20, 23, or 25 guage.
(Optional) Specify Initial Fluid Level - Allows the user to set the starting level of
the fluid in the container using the increment and decrement arrow buttons. This
enables the system to accurately track the fluid level (in terms of percentage) as
the operation progresses and alerts the operator when fluid level is low.
1.
2.
3.
4.
5.
Selection Controls
Connection Help