User's Manual Part 3

8065751025 2.57
Constellation
®
Vision System
The General Purpose Timer
Pressing the Timer Tab (00:00:00) next to the Consumbles button displays the Timer
Configuration popup shown in Figure 2-45. The timer provides for counting up
and counting down from a pre-configured value. The timer features the following
functionality:
Pressing the timer tab when it is running will stop the timer.
Pressing the timer tab when it is not running will launch the Timer Configuration
popup.
Pressing the Start button starts the timer and closes the popup.
If the timer is started when the readout is 00:00:00, it will count up indefinitely.
For countdown mode, enter at starting time using the keypad then press Start. The
timer generates an audible tone when it reaches 00:00:00.
•
•
•
•
•
Figure 2-45 Timer Configuration Popup